Tunze 9012 skimmer I need some help with micro bubbles
- Thread starter quentin17110
- Start date
- Tagged users None
quentin17110
Active Member
- Joined
- Nov 26, 2022
- Messages
- 114
- Reaction score
- 43
- Location
- mobile
- What state or country do you live in
- Alabama
Super Fly
Valuable Member
- Joined
- Apr 19, 2018
- Messages
- 1,454
- Reaction score
- 1,087
- What state or country do you live in
- New Jersey
I don't think there's anything wrong you are doing, the air mixture valve u installed should help control the amount of bubble skimmer makes by reducing air amount. However it does look like there's a small crack on the side of the skimmer where the seam is that's leaking air bubbles into the tank. There should be no air bubbles leaking from side of skimmer.
here's someone else who experienced same thing as you but his didn't have a leak on side of the skimmer.
here's someone else who experienced same thing as you but his didn't have a leak on side of the skimmer.
Fritz05
Active Member
- Joined
- Jun 4, 2021
- Messages
- 216
- Reaction score
- 197
- Location
- Orange County
- What state or country do you live in
- California
I know this is an old post, but I had issues with microbubbles coming from my 9012 and after trying many things the only solution was to place a piece of filter sponge in the bottom of the skimmer body. The piece I use covers the front half of the opening and has reduced my bubbles by 90%.
Similar threads
