Tunze USA eBay Store

[rvitko]

The only way this blue clip is sold is as a set, Blade set 0220.154, it is the stainless blade, the plastic blade and the clip as a replacement set.

 

[rvitko]

I have 6095s and cleaning the front guard the round plastic that snaps on I broke one of the thin grates I'm looking to buy one of those or maybe 4 to have on hand for my 4 6095s. But didn't see that grate on there

It is part 6080.200, in general I probably would not replace it unless the damage is extensive enough an animal you have could get in. This piece is fragile, the mesh is necessarily thin to reduce the flow restriction and modification and as long as it does the job, I would not sweat it. https://www.ebay.com/sch/i.html?_from=R40&_trksid=m570.l1313&_nkw=6080.200&_sacat=0

 

[jschultzbass]

what is the stock magnet for the Tunze 6095? I have a couple older ones and the outside magnet is very large. I think the new ones with the blue ring are a lot smaller....

 

[rvitko]

Yes, there was an old version with large outside magnet small inside magnet, new is magnet 6025.515, however, we have none in stock in the US right now. We do have 6025.500, this is a much stronger magnet, it will fit but it is probably overkill and is more expensive, I also have 6150.515 which would work and is in between in price and strength.

 

[jschultzbass]

Yes, there was an old version with large outside magnet small inside magnet, new is magnet 6025.515, however, we have none in stock in the US right now. We do have 6025.500, this is a much stronger magnet, it will fit but it is probably overkill and is more expensive, I also have 6150.515 which would work and is in between in price and strength.

Is just the outside magnet available or do you have to buy the set?

 

[rvitko]

Sort of, you can buy 6025.501, this is half a 6025.500 and basically designed to upgrade a 6025.512 to a 6025.515 in holding strength, it does not noticeably increase the strength of a 6025.515 and is not a very inexpensive option.

 

[ChrisNH]

I need a new rotary knob for the 7090, I think the part is 7090.102. I ordered it from the main Tunze website. I will find out if I was right when it gets here

New pump but its my fault (well, sort of, ALL the cords should plug into the controller so this would never come up.. ). I just am mentioning this as I think it would be a good candidate for the US ebay web shop.

In the short term its not problem, I switched which pump controller is master.

 

[rvitko]

If we don't have it in stock we don't list it on eBay, we remove what is not in stock in the US, the Tunze site reflects stock on hand in Germany. I did not get your tunze.com order, can you email me or message me the details so I can look into it? We should have these knobs back in stock next week.

 

[rvitko]

I got your order, it was forwarded to me this morning, I should be able to ship early next week.

 

[ChrisNH]

I got your order, it was forwarded to me this morning, I should be able to ship early next week.

Thanks, I am in no rush, I am good for now. I appreciate your help! Next time I find something wrong just before I go to bed I will let it wait until morning!

 

[raultsu]

My dial broke on my macro algae reactor controller. Can I get this on ebay?

 

[rvitko]

Generally, yes, our internet is down today and we need to relist it, so I am working from my phone, can you message me your address? This is part 7090.102