Two Part

[ss88]

Hello all,

How much two part is being wasted?

I have an SPS dominated reef system around 400 gallons in total. Some very large sps colonies. 1/2’ . Around one month ago I switched to sodium hydroxide from soda ash to get a pH bump. Fast forward, I am now able to maintain a stable pH at 8.3 with around a 0.05 swing daily. What I have seen however is an increased precipitation of calcium chloride on the walls of the aquarium and increased sps growth. Yesterday in total I used around 2700dkh from a combination of sources. I dosed 5000ml ml of fully saturated kalkwasser, 950ml sodium bicarbonate and 1350ml of sodium hydroxide.

Before asking, the sodium hydroxide is being delivered to the sump directly in front of a power head.

Back to the question, how much am I wasting?

Using this much two part seems like a recipe for water chemistry issues. I do use tropic marin part c.

Should I just turn on the calcium reactor and add a large refugium to help with the demands? The tank is only half way full, can’t imagine the two part requirements at 100% capacity.

 

[ss88]

Forgot to mention dkh is stable at 7.4

 

[ScottB]

You might have to take this question over to the Chemistry forum to figure out "how much" is being wasted versus consumed. I have seen people do math over there Have your solution figures ready, we don't want to guess on concentration levels.

Having stuff precip out isn't great for a few obvious reasons. Waste and also wear on mechanicals.

I dose ESV 2-Part (always have) at about 100ml and 4liters of Kalkwasser each cycle. Dosing Kalk really lets me stretch my ESV use. It was +250ml before kalk. Great combo IMO.

 

[ss88]

What size system and bio load?

I dose ESV 2-Part (always have) at about 100ml and 4liters of Kalkwasser each cycle. Dosing Kalk really lets me stretch my ESV use. It was +250ml before kalk. Great combo IMO.