UNS 90LA kitchen reef for my #Return2Reefing

Looking great. The narrowness does add an extra challenge but I think it's worth it. I've got mine against a wall so I'll mount the lights off the wall.
Have you considered the UNS or would it be too small for you?
 
How's the tank coming along? Thinking of this setup as well - but the light situation is a bit perplexing. Might look to mound some lights from the ceiling... which is new to me.
I had a ton of difficulty mounting my AP9X to this tank but finally managed to rig it using some cheap hanging arms from Amazon and a hanging kit from a different brand (the Kessil one was too long; the two strands on each side didn’t come together to the main strand for 10” which wouldn’t have worked with the hanging arms- it was a whole debacle).
 
Sweet looking tank!

You have a ton of light for that tank. There should be no problem growing sps.
I don't like glass lids because they prevent good gas exchange and there by lower pH. Typically they're used to assist in preventing excessive evaporation, but you have a good ATO so that shouldn't be a concern. Lastly they do make mounting certain lighting types more difficult.

Two clowns will own that tank, as they mature the will bully any introductions including inverts, choose wisely. I would do 1 clown and the shrimp/ goby combo.

I don't use live rock because of a history of nightmare hitchhikers. To cycle my tanks I use Microbactor7 and Ammonium Chloride. My tanks cycle right around the 3 week mark. I do not light the tank until live stock goes in.

Honestly you have a decent foundation so you should think of adding some easier cheap sps in a month or two.

Welcome AJ
This. Ugh, the glass tank lid. It’s not designed well and I almost lost all of my fish when I first set it up due to that. If you fill the chambers and the tank is full, the point at which the attachments hold the glass is right on top of the water. You basically have to keep your water levels low in the chambers in order to keep it low enough in the tank to leave enough room for sufficient air movement between the glass and the top of the water. This means you have to watch the tank/water levels more closely (daily) because that leaves less water coverage above the water heater fill line, which I have in the middle chamber, pump, etc. I just ordered a Kraken Reef lid and it works much better because it sits on top of the tank (and not low inside it) and also has mesh.

Curious why you didn’t go with the AI Coral Blade Grow? It’s worked great for me. My tank is in a butler’s pantry on a counter top like yours was, so the space between the tank and the cabinet above limited my options but fortunately it’s worked out. Awesome that you found a well-fitting stand for it. If I move my tank, that will be my challenge. And yep, cord management is an issue with this sleek tank. But, overall, I love it and even set up a second one with a Sponge Bob theme in my kids’ room for their goldfish. ☺️

My SW set-up currently is very simple and running without an ATO or a skimmer - only an additional wave maker - how is the equipment you bought working with yours?
 
Last edited:
This. Ugh, the glass tank lid. It’s not designed well and I almost lost all of my fish when I first set it up due to that. If you fill the chambers and the tank is full, the point at which the attachments hold the glass is right on top of the water. You basically have to keep your water levels low in the chambers in order to keep it low enough in the tank to leave enough room for sufficient air movement between the glass and the top of the water. This means you have to watch the tank/water levels more closely (daily) because that leaves less water coverage above the water heater fill line, which I have in the middle chamber, pump, etc. I just ordered a Kraken Reef lid and it works much better because it sits on top of the tank (and not low inside it) and also has mesh.

Curious why you didn’t go with the AI Coral Blade Grow? It’s worked great for me. My tank is in a butler’s pantry on a counter top like yours was, so the space between the tank and the cabinet above limited my options but fortunately it’s worked out. Awesome that you found a well-fitting stand for it. If I move my tank, that will be my challenge. And yep, cord management is an issue with this sleek tank. But, overall, I love it and even set up a second one with a Sponge Bob theme in my kids’ room for their goldfish. ☺️

My SW set-up currently is very simple and running without an ATO or a skimmer - only an additional wave maker - how is the equipment you bought working with yours?

I ended up with the ReefBreeders Meridian 11 on my 25. I decided I would never use a fixture that required an app to run. Meridian has a manual option.
No lid for me on the 25. Maybe I will get the screen lid down road.
I use 2 Hygger wave makers.
Love the Tunze Osmolator 3 ATO.
Bubble Magus Skimmer on a timer to run at night only.

🙂
 
I ended up with the ReefBreeders Meridian 11 on my 25. I decided I would never use a fixture that required an app to run. Meridian has a manual option.
No lid for me on the 25. Maybe I will get the screen lid down road.
I use 2 Hygger wave makers.
Love the Tunze Osmolator 3 ATO.
Bubble Magus Skimmer on a timer to run at night only.

🙂
I’m the opposite and like a light with an app because I usually have more trouble with manual only ones. 😅

I have a goby and a Firefish so a lid for me is mandatory. Kraken is a great lid option for anyone interested, for sure. I just ordered a second one for another tank.

You have two wave makers on a 25g? I have a sicce, and I’m considering getting a flow generator nozzle attachment for my return pump, but now I’m wondering if I want to half the flow to the surface (decrease it) in order to aim half of it toward a dead spot. 🤔

With only one chamber available on this tank (media in first; pump in third), I’d have to move the heater into the display in order to get a skimmer, but I’m considering it. My nutrients are often a bit higher than I like. An ATO would require me to add a backpack reservoir and I worry a bit about the consequences of ATOs failing. I’m looking at 100+ gallon systems now tho and will likely have to bite the bullet then.
 
You have two wave makers on a 25g? I have a sicce, and I’m considering getting a flow generator nozzle attachment for my return pump, but now I’m wondering if I want to half the flow to the surface (decrease it) in order to aim half of it toward a dead spot. 🤔

Yes two Hygger with alternate wave patterns. I want spiraling Montipora this time around.
 

TOP 10 Trending Threads

WHAT KIND OF REEFING DEAL ARE YOU HOPING TO PICK UP THIS BLACK FRIDAY?

  • A whole new aquarium or complete system

    Votes: 1 7.7%
  • Lighting, pumps, or other major equipment

    Votes: 2 15.4%
  • Controllers, testing, dosing, or automation gear

    Votes: 2 15.4%
  • Dry goods and restocks, like salt, media, or food

    Votes: 1 7.7%
  • Corals! Must...Have...CORALS!!!

    Votes: 2 15.4%
  • Fish or other livestock

    Votes: 0 0.0%
  • Rock, sand, or other aquascaping supplies

    Votes: 1 7.7%
  • I’m browsing, but don’t have a specific target

    Votes: 2 15.4%
  • I’m not shopping for reef deals this year

    Votes: 1 7.7%
  • Other (Post in the comments)

    Votes: 1 7.7%
Back
Top
Home
Post thread…
Market
What's new