- Joined
- Jul 27, 2016
- Messages
- 254
- Reaction score
- 733
Can be ordered finally:
https://www.aquariumcomputer.com/new-led-replacement-clusters-for-mitras-lx6/
https://www.aquariumcomputer.com/new-led-replacement-clusters-for-mitras-lx6/
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Thanks Marco. I don't understand - even if I connect the Mitras to the Profilux 3.1 wirelessly using the PLM-PWC, are you saying I won't be able to control the lights through GCC unless I also connect my PC to the LX6 with a USB cable?You may connect the lights wirelessly to your P3/P4 via the PWC card, correct, this wireless connection is NOT IP based for your computer/GCC/MyGHL to program though. For that, you'll still use USB cable. If you're going to connect to a ProfiLux controller, essentially the MyGHL feature is not required.
Ah, ok. Thanks!
What about mixing lx6 + lx7 on same install - is that ok?
Sorry, I meant mixing an LX7 with an LX6 after upgrading to the new LEDs ... all channels should be the same, right?We don't recommend it.
You will not be able to program a different program(difference in light channels) based on device. So your lights would look significantly different as one has a UV in place of a White 4400K. If you're blasting White at 80% in your project, you'd have UV blasting at the same % on the LX7's.