Urgent GHL profilux powerbar

[Makki_73]

Does anyone know how to set up a control outlet for the CO2 regulator solenoid on the power bar 6d through GHL connect.

I tried looking everywhere online but couldnt find anything helpful.

I dont have a laptop on me so can I do it through GHL connect ? I disconnected my dosers and dosing tube so I have to install the calcium reactor asap.

Can anyone help me with brief steps ?

 

[Mastiffsrule]

Bump

 

[CEReefer]

I would either ask on the official GHL Forum (yes, they have an English speaking forum too) or maybe @Ditto can help!

 

[vangvace]

All of this I can do from my phone and the GHL app:

Go into switch channels. Select and label the appropriate outlet to be your co2. Under Function, select the pH probe for your reactor. (In my case it was pH-value 2) the other option is to then control downwards.

Next, go to that pH probe. Set the nominal value for where you want you reactor to be kept and the hysteresis... Something like 6.5 and 0.1 for example.

That is it, it is set to control the solenoid and the pH of your reactor.


If you add on the KHD you can have it adjust according to test results within a specific range.

 

[Ditto]

I am sorry for some reason people are tagging me and I am not getting the alert. If you do not hear from me please PM.

@vangvace is spot on.