Using Neptune gear with ghl profilux

[JAIMEC]

Hi, I'm currently an Apex user and am looking to switchover to GHL.

Would i still be able to use my stand-alone Neptune gear like the Cor-20, ATK and Wav with the GHL Profilux?

 

[paul01609]

I’m sure the cor20 and ATK can be used stand alone

 

[JAIMEC]

I’m sure the cor20 and ATK can be used stand alone

Ah so Wav isn't stand alone. Thought they were. Thanks.

I wonder if anyone has programmed their stand-alone Neptune gear with the Profilux.

 

[ingchr1]

Only just took a quick look at the Wav, and it looks to be a 24VDC pump. The Profilux has 1-10V output control (L-Ports). That is for controlling things not powering them. So you would need a 24VDC power supply to power the pump, and that 24VDC power supply would have to have 10V control.

A couple of possibilities that could work. These are only off the top of my head and would need some research.

1. Get a Tunze Turbelle controller, Tunze Turbelle 24V power supply and Profilux-Tunze cable.
2. Get a Reef Brite Apex LED interface, Reef Brite 24V power supply and GHL S-Port/L-Port Breakout box.

 

[JAIMEC]

Only just took a quick look at the Wav, and it looks to be a 24VDC pump. The Profilux has 1-10V output control (L-Ports). That is for controlling things not powering them. So you would need a 24VDC power supply to power the pump, and that 24VDC power supply would have to have 10V control.

A couple of possibilities that could work. These are only off the top of my head and would need some research.

1. Get a Tunze Turbelle controller, Tunze Turbelle 24V power supply and Profilux-Tunze cable.
2. Get a Reef Brite Apex LED interface, Reef Brite 24V power supply and GHL S-Port/L-Port Breakout box.

Thanks Ingchr1! This sounds promising!