Vanadium and Nickel off the charts?

  • Thread starter Thread starter LBReefer
  • Start date Start date
  • Tagged users Tagged users None

LBReefer

Well-Known Member
View Badges
Joined
Jun 22, 2016
Messages
995
Reaction score
712
Location
Long Beach
What state or country do you live in
California
Rating - 0%
0   0   0
I just got my ATI test results back and my nickel (73 ug/l) and vanadium (635 ug/l) levels are off the charts.

What is driving this? Is this why I have lost every shrimp that I have added to the tank and have had limited coral growth?

Thank you in advance!

- LBReefer
 
Last edited:
What type of sand are you using.
 
Now I'm using carib sea white/pink sand. I had black sand earlier that I moved to my sump. I'm guessing that may be responsible for the high levels ...
 
Yep it might be. @Brew12 did tests of black sand and came up with levels of both what you came back with. It was @Robin Haselden tank that was tested. He was also loosing corals. I would remove the sand.
 
Yep it might be. @Brew12 did tests of black sand and came up with levels of both what you came back with. It was @Robin Haselden tank that was tested. He was also loosing corals. I would remove the sand.
Any recommendations on how to do that? The sand is trapped in some narrow baffles and below an egg crate like structure attached to the middle chamber.
 
Any recommendations on how to do that? The sand is trapped in some narrow baffles and below an egg crate like structure attached to the middle chamber.
Photos to clarify.
20181027_110704.jpeg
20181027_110700.jpeg
 
Small suction hose?
Close.

Three trips to home depot, draining the sump and three blades for my dremel led me to cutting out the bottom tray in the central chamber. After that a soda cup and the shop vac made relatively short work of removing the sand.

Between draining, experimenting with cutting tools, and refilling the sump, I was pleasantly distracted from the Dodgers loss and/or seeing the sun.

For my next tank, I'm going to find a way to raise the sump a bit. Spending the day on my knees, bent over the sump is making me feel prematurely old.

I added carbon and ordered refills for my resin chambers, anticipating the need to make a lot of new water in the next couple weeks. How much of a water change do I need to perform and how long should I wait to do another ICP test?


Thank you all for your help. I'll be contacting @BRS tomorrow to let them know about the potentially contaminated sand.

- D
20181028_203412.jpeg
20181028_182742.jpeg
 

TOP 10 Trending Threads

WHAT KIND OF REEFING DEAL ARE YOU HOPING TO PICK UP THIS BLACK FRIDAY?

  • A whole new aquarium or complete system

    Votes: 2 9.5%
  • Lighting, pumps, or other major equipment

    Votes: 3 14.3%
  • Controllers, testing, dosing, or automation gear

    Votes: 2 9.5%
  • Dry goods and restocks, like salt, media, or food

    Votes: 2 9.5%
  • Corals! Must...Have...CORALS!!!

    Votes: 5 23.8%
  • Fish or other livestock

    Votes: 0 0.0%
  • Rock, sand, or other aquascaping supplies

    Votes: 1 4.8%
  • I’m browsing, but don’t have a specific target

    Votes: 4 19.0%
  • I’m not shopping for reef deals this year

    Votes: 1 4.8%
  • Other (Post in the comments)

    Votes: 1 4.8%
Back
Top
Home
Post thread…
Market
What's new