MIke Wood
Active Member
- Joined
- Aug 31, 2018
- Messages
- 236
- Reaction score
- 112
- What state or country do you live in
- New York
Hi,
Im very new to apex. i have an old apex lite. I want to run a few Nicrew 100s using a VDM and kessil connect cable. I run hybrid with t5s and use leds solely for the blue spectrum. I want to ramp the blue up for an hour and run them at 70% for an hour. then ramp down to 55% over 5mins and run at 55% for 6 hours, which is the time my t5s are on. I would then ramp back up to 70% over 5mins and then run 70% for an hour then ramp down to 0 over an hour.
Can i do this by just setting up 4 different "ramp" profiles?
Also i have read that these light cant ramp down past 10% they will turn off a that point. do i need to creat a profile to have them turn completely off? i dont have room on my eb8.
Thanks in advance.
Im very new to apex. i have an old apex lite. I want to run a few Nicrew 100s using a VDM and kessil connect cable. I run hybrid with t5s and use leds solely for the blue spectrum. I want to ramp the blue up for an hour and run them at 70% for an hour. then ramp down to 55% over 5mins and run at 55% for 6 hours, which is the time my t5s are on. I would then ramp back up to 70% over 5mins and then run 70% for an hour then ramp down to 0 over an hour.
Can i do this by just setting up 4 different "ramp" profiles?
Also i have read that these light cant ramp down past 10% they will turn off a that point. do i need to creat a profile to have them turn completely off? i dont have room on my eb8.
Thanks in advance.
