Vertical Frag Racks, Anyone??

Pola0502ds

Zoa Addict
View Badges
Joined
Jan 13, 2016
Messages
1,573
Reaction score
881
Location
Poland, Ohio
What state or country do you live in
Ohio
Rating - 0%
0   0   0
has anyone ever come across vertical frag racks that you can hang on the sides of your tank? I need more room but horizontal frag racks cast too big of a shadow below it once they are full and covered in coraline. I saw one coral vendor do this before, it was really nice but i couldnt remember the name.

I would like a rack that is hang on so it can be easily removed if mounted to the back of the tank and you could put rubber bands on the back of the plug after you insert it into the rack to prevent the frag from falling out. Or, get a rack like the guys at building an obsession make with the silicone inserts.
 
What about something like this:
https://www.amazon.com/YCA-Magnetic-Frag-Tree-Clear/dp/B01NCQD4H3
51hfUJGLhFL._SX466_.jpg
 
Thats cool but i need i need volume and that piece takes up a lot of horizontal space.

I want all the sides of my tanks to have racks with frags jam packed.

I want to take a rack like this:
688D7D5B-CD7C-4C00-8B44-B79BF5BE7FAE.jpeg

And turn it into somethinf like this:
15143D8A-1F0A-416F-84FF-FFEB422E45F1.jpeg
 
has anyone ever come across vertical frag racks that you can hang on the sides of your tank? I need more room but horizontal frag racks cast too big of a shadow below it once they are full and covered in coraline. I saw one coral vendor do this before, it was really nice but i couldnt remember the name.

I would like a rack that is hang on so it can be easily removed if mounted to the back of the tank and you could put rubber bands on the back of the plug after you insert it into the rack to prevent the frag from falling out. Or, get a rack like the guys at building an obsession make with the silicone inserts.

i’ve done some these custom before but with magnets. the plugs stuck straight out and not at an angle though. it was a one-off custom deal because i didn’t think there would be a high demand for them,
 
How about an angled rack? The legs would hold it off the sides which would angle your plugs up slightly. I rotated the picture to sort of show it. Just have to find a way to mount it.
7F77C5B4-3544-42AC-BA2B-299931A3E5C5.jpeg

I would also stand off the top a bit so the top plugs can sit in fully.
 

TOP 10 Trending Threads

WHAT DO YOU ALWAYS RUN OUT OF AT THE WORST TIME?

  • Salt mix

    Votes: 17 18.3%
  • Fish or coral food

    Votes: 5 5.4%
  • Test kits or reagents

    Votes: 10 10.8%
  • Filter media or replacement fleece

    Votes: 5 5.4%
  • RO/DI filters or supplies

    Votes: 14 15.1%
  • Fragging and repair supplies, like glue or epoxy

    Votes: 11 11.8%
  • I keep a backup of everything

    Votes: 24 25.8%
  • Other (Post in the comments)

    Votes: 7 7.5%
Back
Top
Home
Post thread…
Market
What's new