Vortech MP40s

[cmjreef]

I have 2 of these on a standard 4foot 120. My question is this: Should I put both of the Vortechs on one side of the tank or one on each side or what? Any experiences would really help out. I'll just have to start experimenting myself I guess. Thanks.

 

[subielover]

Opposite sides. It helps to create a more random turbulent flow, IME.

 

[Sikryd]

One on each side, about 8in below the surface on one side and 10-11in on the other side.

 

[seafansar]

I have a 150 with two on the back. They create a good amount of flow from there and don't block any viewing on the sides.

 

[kirkleigh84]

I have mine on opposite sides one is 6 inches down center glass othe 8 inches down center glass

 

[Smartfish]

One on each side. I have one right now and will purchase another one for the opposite side eventually.

 

[roscoe]

I have mines on opposite ends of a 72''x36xx tank.

 

[butts182]

each end. i will be adding one to the other end of my tank also

 

[jcom]

I have mine on opposite ends directly across from each other, about 6 - 7 inches below the surface on my 120. Good surface disturbance, but not too much, and minimal sand bed disruption.

 

[amay121]

One on each side for me as well. ~7" from the water line.

 

[Erick@]

I just put mine one one side about 6" down.

 

[LegoZ81]

mine are opposite sides as far down as possible without completely sandstorming the tank. They are on reef crest creating random turbulance. I am using 2 tunze 6125's as primary full time flow lamnier like flow.

 

[powderhound]

i have 2 on my 75 gal tank. i played around with all diferent configurations and found having on opposite side of the tank one towards the front and one toward back works the best for me. they are both about 8 inches down from the top of the tank.