Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
I make my water both fresh and salt in my basement. I have a pump that I switch back and forth from bin to bin for the return that feeds my sump. I have a drain that is then plumbed into my drain in my basement. I start a siphon from my display and know exactly how much water I need to remove by marking it on the display. Both bins are 50 gallon brute trashcans.
I would try to hook it up somewhere on the return line from the sump. Above a ball valve so the water is directed to the tank.
Use reduction fittings and maybe a hose barb if you use soft tubing to the pumpI know I can run an additional horizontal pipe to my water change pump, but if it’s a smaller pump, how would you connect the pump to plumbing?
Use reduction fittings and maybe a hose barb if you use soft tubing to the pump
My solution isn't plumbed into the tank, but it works. I use a separate pump and three sections of 1'' flexible vinyl tubing and pump the water from the display into the commode. The sections of vinyl tubing are connected via unions. Then I drain the tubing and use the same pump to pump the new water from two brute cans into the display.