Scallopking
Active Member
- Joined
- Nov 9, 2013
- Messages
- 450
- Reaction score
- 680
- Location
- Cleveland, TN
- What state or country do you live in
- Tennessee
So hey there, just got my water box sump dialed in, I think. Been having to tinker with it last two weeks to level out drain vs return. For those with this sump, really Stupid question first off, I think that plastic needs to go right? It part of the packaging I’m thinking. Going to feel real stupid either way.
Okay and here’s a video if it works. This the the flow through the sump. My return is turned down a couple notches and the drain isn’t fully open. The problem I was having was all the bubbling at the surface on the first drain compartment and lots of salt creep and then somehow I got it to where you see now. I put a picture also of the drain area view and the water surface in there. Anyway, does all this look right? The flow is pretty fast I think. Make sure that I have enough turnover. Thanks everyone.
Okay and here’s a video if it works. This the the flow through the sump. My return is turned down a couple notches and the drain isn’t fully open. The problem I was having was all the bubbling at the surface on the first drain compartment and lots of salt creep and then somehow I got it to where you see now. I put a picture also of the drain area view and the water surface in there. Anyway, does all this look right? The flow is pretty fast I think. Make sure that I have enough turnover. Thanks everyone.
