Waterfall noise coming from drain pipe

[oriarty]

today my aquarium finished filling up and I have started the return pump. The problem is that there is a loud noise coming from my plumbing like a waterfall is flowing. I have tried everything. Slowing down the return pump. Limiting the flow for the drain pipe. Nothing works. How do I fix this? The noise is disturbing the living room a LOT.

 

[Mr. Mojo Rising]

1. The drain pipe should go a little below the water line in the sump.

2. Close the valve on the main drain until you find the sweet spot where the noise is minimal. If the drain is fully open you get the waterfall noise.

I'm new to sumps, hope this bump gets more looks and more suggestions for you

 

[TheBear78]

It may be flowing down your emergency drain (it looks like you have one?). If this is the case, you may need to open the drain valve more.

 

[oriarty]

It may be flowing down your emergency drain (it looks like you have one?). If this is the case, you may need to open the drain valve more.

The drain valve is fully opened and my weir to drainbox water level difference is pretty big. No emergency drain in use.

 

[TheBear78]

The drain valve is fully opened and my weir to drainbox water level difference is pretty big. No emergency drain in use.

Going on that last statement, I would say you need more water but the return chamber is full which suggests not...
How long did you run it with the valve closed? Did you fully close it? Sometimes it takes a while to settle but a big change should be obvious fairly quickly.
With the valve fully closed you should be able to increase the water level in the overflow. If you can't then maybe the valve isn't working properly but that type should be fairly bombproof.

 

[ca1ore]

Video didn’t work for me. You should only be using a drain valve with dual/herbie or triple/bean configurations.