What does your RODI setup look like?

  • Thread starter Thread starter 11f150
  • Start date Start date
  • Tagged users Tagged users None
My setup...

IMG_9082.jpg


2012-09-25_05-57-44_849.jpg


I'm not a fan of long hoses, rolling Brutes, or buckets. :D LOL
 
wow those all look great. cant wait to buy my own house. mines pretty ghetto but does the trick with very lil effort from me.
tank is right next to the unit. run a cord from the bathroom to the unit and the waste line to the sink. i usually fill the white 55g drum with rodi water and then when it get to about 25g left i make saltwater. do a wc rinse the drum and repeat again. about every 2 weeks.
5a5eaff7.jpg
 
2 55 gallon drums. I one for salt one for Rodi and ato. Bottom feed pump for water changes and moving Rodi to mixing barrel. Pump is used to mix salt. Brs 75 gpd 6 stage Rodi tapped to cold water with drain waster to sump which than gets pumped to back yard.

gytyzuju.jpg

gadamaqe.jpg
 
Thanks everyone for the ideas, it helped me alot coming up with what I want to do. Here is what I plan on doing with a setup once I get there. I used my expensive program to design it called "paint". If anyone has any suggestions let me know.

rodisetup-1.jpg
 
Last edited:
Looks like a nice setup. I saw at HD that they now offer 44 gallon Brute cans as well as 32 gallon...
 
Might consider putting a T and a valve in case you just need to get Rodi

Sent from my SPH-L710 using Tapatalk 2
 
Yup. Agree with deboy69. Put a valve where the reservoir drains to the mixing station. You'll want to get to the RO/DI water from time to time. That's why I have 3 containers altogether. One is for RO/DI from the unit, one is for RO/DI water alone (it's got a 1/4 line going directly to my sump for top off), and the other one is for salt mix.
 
great design, but yeah, you will need Fresh RODI for top off, so add a T fitting and a ball valve.
 
O and I'm a big proponent of unions just in case you have to disconnect the top or bottom barrel to clean them. Easier and less pipe to hit the walls or doors

Sent from my SPH-L710 using Tapatalk 2
 
Yes use a T to split the RO/DI. That's how I have mine. Also if you use aquariums. It will be easy to clean.



____________________________
Sent from my iThingy using Tapatalk
 
Looks like a nice setup. I saw at HD that they now offer 44 gallon Brute cans as well as 32 gallon...

Im completely fine with using the brute can but I read somewhere that some people have had issues with those cans. Something about there is some kind of film in the cans, maybe a antibacterial of somekind. Anyone have issues ever? I might try to get a few of the 55 gal water safe barrels
 
I will say that the standard 32 gal Brute Cans you find at Lowes and HD, are not labeled as food safe plastic. I use them, but have always been wary of them. And clean them with bleach on occasion. I would use something different but space issues are the real concern for me.
 
I will say that the standard 32 gal Brute Cans you find at Lowes and HD, are not labeled as food safe plastic. I use them, but have always been wary of them. And clean them with bleach on occasion. I would use something different but space issues are the real concern for me.

What information do you have that says these brutes are not food safe hdpe?
 
Straight from the horse's mouth:

Gray, white and yellow brutes are certified to NSF Standard #2

NSF/ANSI Standard 2: Food Service Equipment
Equipment commonly known as 'fabricated food equipment': kitchen, bakery, pantry and cafeteria units, and other food handling and processing equipment including tables and components, counters, shelves, sinks, hoods, etc.

for more detail: Rubbermaid Commercial Products - Rubbermaid Waste : 2632 BRUTE® Container without Lid

These are the brutes that are used widely in the hobby, and are available at many hardware stores.

Russ
 
Last edited:

TOP 10 Trending Threads

Back
Top
Home
Post thread…
Market
What's new