What is the best Potassium Additive?

  • Thread starter Thread starter ASIN28
  • Start date Start date
  • Tagged users Tagged users None

ASIN28

Active Member
View Badges
Joined
Aug 18, 2020
Messages
471
Reaction score
227
Location
Long Island
Rating - 0%
0   0   0
Hey all,
Just running a little low potassium even after a water change it no longer replenishes it all. What is the best potassium product out there that you recommend to dose into my reef tank?
Thanks
 
I recommend I herb/Now foods potassium chloride from Amazon.
Do you recommend using potassium for a long time basic or do you think we should be considered it? How do you test and what levels should we be achieving?
 
Do you recommend using potassium for a long time basic or do you think we should be considered it? How do you test and what levels should we be achieving?

My tank never needed any, and there’s no inherent reason a tank should need it, but if demand from growing tissue is higher than additions from foods, then it can be needed.

While there are some kits available, ICP may be a better bet.
 
My tank never needed any, and there’s no inherent reason a tank should need it, but if demand from growing tissue is higher than additions from foods, then it can be needed.
Thank you for the advice. I am just trying to figure out why we cannot keep SPS alive and thought this could be why. We have been in the saltwater fish world a long time...over 30 years with just fish, and about four years or so ago, we started with corals. I do know, Alk, Ca, Mg, NO2, NO3, Phos, and more but these are stable.
 

Attachments

  • Screenshot_20250507_062438_Amazon Shopping.jpg
    Screenshot_20250507_062438_Amazon Shopping.jpg
    230.2 KB · Views: 21
So Randy is this the product you were recommending

That is not the exact brand I mentioned, but that one looks like a good choice. It has a small amount of magnesium hydroxide carbonate in it, which will give a tiny boost to alk, pH, and magnesium, but probably too small to ever detect.
 
This is the one I was referring to, but I see it now lists a bit of magnesium carbonate as well. Both are fine.

https://a.co/d/5hxgJMR
 
It has a small amount of magnesium hydroxide carbonate in it, which will give a tiny boost to alk, pH, and magnesium
Are you sure? It looks like it’s just food grade potassium chloride. The ingredients only say potassium chloride.

IMG_0787.png
IMG_0788.png
 
Are you sure? It looks like it’s just food grade potassium chloride. The ingredients only say potassium chloride.

IMG_0787.png
IMG_0788.png

Under “Additional Details” the ingredients list magnesium hydroxide carbonate.
 
Hi all! I am wondering how many grams will I need to use in out in a 1000L bottle and to raise my Potassium up by 15? Thank you so much! The link below is what I will be using
amazon.com/gp/product/B00ENS39XK/ref=sw_img_1?smid=A8MA32QEVO3GI&psc=1
 
Hi all! I am wondering how many grams will I need to use in out in a 1000L bottle and to raise my Potassium up by 15? Thank you so much! The link below is what I will be using
amazon.com/gp/product/B00ENS39XK/ref=sw_img_1?smid=A8MA32QEVO3GI&psc=1

The link does not pull up a specific product.

The best product to use would be food or other high grade of potassium chloride.

Potassium chloride is 52% potassium by weight.

To boost 100 L of aquarium water by 15 ppm (mg/L), you would need to add 15 mg/L x 100 L = 1500 mg = 1.5 grams of potassium.

If you dissolve 28.8 grams of potassium chloride (which contains 15 grams of potassium) in 1 L of RO/Di, then it contains 1.5 grams for every 100 mL of solution.

Using that dosing solution, you would add 100 mL to boost potassium in 100 L by 15 ppm.
 
The link does not pull up a specific product.

The best product to use would be food or other high grade of potassium chloride.

Potassium chloride is 52% potassium by weight.

To boost 100 L of aquarium water by 15 ppm (mg/L), you would need to add 15 mg/L x 100 L = 1500 mg = 1.5 grams of potassium.

If you dissolve 28.8 grams of potassium chloride (which contains 15 grams of potassium) in 1 L of RO/Di, then it contains 1.5 grams for every 100 mL of solution.

Using that dosing solution, you would add 100 mL to boost potassium in 100 L by 15 ppm.
You are awesome thank you! Can I double the grams into the one liter or would that be overkill? I am using Loud Wolf KCl, which is 99% Pure/ Food grade
 
I would be extra carful adding K. Salifert test kit is a piece of crap and is not to be trusted. Tropic Marin has a more accurate one but is a pain to use
 

TOP 10 Trending Threads

Back
Top
Home
Post thread…
Market
What's new