Which t5 to add to my Led's

  • Thread starter Thread starter Stang67
  • Start date Start date
  • Tagged users Tagged users None

Stang67

KEEP CALM AND REEF ON
View Badges
Joined
Mar 26, 2019
Messages
13,703
Reaction score
61,231
Location
CLE
What state or country do you live in
Ohio
Rating - 100%
1   0   0
I am looking for suggestions.
Currently running a 180g 6x2x2. Lighting is 2 reefbreeders photon leds.
I want to add some t5 fixtures to help my sps growth. I don't think there is a hybrid fixture that will work with the reefbreeders photons. Hoping to add a bar in front and behind similar to a hybrid.
If that's not gonna do much may just switch them out completely.
What do you think? Suggestions ?
20230706_163818.jpg
 
8.5" wide.
I am looking for suggestions.
Currently running a 180g 6x2x2. Lighting is 2 reefbreeders photon leds.
I want to add some t5 fixtures to help my sps growth. I don't think there is a hybrid fixture that will work with the reefbreeders photons. Hoping to add a bar in front and behind similar to a hybrid.
If that's not gonna do much may just switch them out completely.
What do you think? Suggestions ?
20230706_163818.jpg
 
8.5" wide.


I can't find the brackets or end caps any where. I have reached out to both reefbreeders and ati as well. I don't think they exist anymore.
 
If possible you could build a floating canopy and run retrofit t5?

Example of what I'm talking about below

f54f0916-f58c-420f-a22f-0ce769e16bf1.jpg
Can't drill into the ceiling. It's old plaster. I could possibly make something and attach it to the existing t slot supports i have.
 
So I used pallet boards (you can use any board) and put them across my back wall then used shelf brackets that have hooks on them to hang my lights. I then painted the boards in an attempt to camouflage them.

My house is old so I don’t have crisp ceilings or walls/trim so it fits lol. I think you could make them look crisper in a different style home. I have drop ceiling so I can’t hang from mine. I’m considering adding a T5 but I have so much light in my tank (this pic is a little older) it would probably be overkill (I haven’t decided yet). Also reefbreeders sells a mounting bar type deal (it’s similar to T-track) for their meridian edge models that could probably work in adding T5s to the front and or back of your lights. I’d imagine the bars are somewhat universal.

But here’s a picture:

20250706_112940_EF2A6262-D91C-4697-B511-15FA0355F000.png
 
Last edited:
T5s go up to 60” still

I’d look at adding some AI Blades though. Much easier and cleaner install
 
I can't find the brackets or end caps any where. I have reached out to both reefbreeders and ati as well. I don't think they exist anymore.
The fixtures are aquatic life not ati...
1000002844.png
 
I am looking for suggestions.
Currently running a 180g 6x2x2. Lighting is 2 reefbreeders photon leds.
I want to add some t5 fixtures to help my sps growth. I don't think there is a hybrid fixture that will work with the reefbreeders photons. Hoping to add a bar in front and behind similar to a hybrid.
If that's not gonna do much may just switch them out completely.
What do you think? Suggestions ?
20230706_163818.jpg


I'm not sure if the size is available or if you could do it with your light mount but i ran an aquatic life 4 bulb t5 hybrid fixture on my photon 24. Rather than mounting the LED to the hybrid fixture I set the fixture on top of the photon and it fit nicely.
I ran it over my reefer 170 for a while.

image.jpg


image.jpg
 
I'm not sure if the size is available or if you could do it with your light mount but i ran an aquatic life 4 bulb t5 hybrid fixture on my photon 24. Rather than mounting the LED to the hybrid fixture I set the fixture on top of the photon and it fit nicely.
I ran it over my reefer 170 for a while.

image.jpg


image.jpg
I remember seeing this before when I was looking before. I was thinking if red necking an extension of some sort.
 
I use two 48” Sunblaster T5 (Amazon) units, one with an ATI Blue Plus (460nm) and the other, a Giesman Antinic (420nm] in addition to my LED array.

You’d have to deal with how to attach them to your existing array.

IMG_1007.jpeg
 

TOP 10 Trending Threads

HOW WOULD YOU FEEL ABOUT RECEIVING A FISH OR CORAL AS A HOLIDAY GIFT?

  • I’d love one, as long as it’s a species I chose

    Votes: 17 28.3%
  • I’d trust someone who knows my tank to choose

    Votes: 2 3.3%
  • I’d rather get a gift card and pick it myself

    Votes: 23 38.3%
  • I’d prefer gear or supplies instead

    Votes: 1 1.7%
  • Please don’t surprise me with livestock

    Votes: 17 28.3%
  • Other (Post in the comments)

    Votes: 0 0.0%
Back
Top
Home
Post thread…
Market
What's new