Which Tunze?

  • Thread starter Thread starter Edmund Y.
  • Start date Start date
  • Tagged users Tagged users None
Just a generic pattern to try and you can fine tune it from there-

One pump in each back corner about 8" from the top with a very slight upward angle, just a few degrees, aim them to hit the front about 4.5ft away, you don't want to go corner to corner but before the corner, corner to corner the flow bounces back, if we hit before the corner we glance it and roll it around. I would have one pump idle at low speed and the other pulse between the lowest speed and the highest speed you corals can handle. Every 6 hours switch them so the other pulses and the other idles. As far as the wide vs narrow, narrow flow is about 18" wide 7ft of reach, wide flow is a bit over 2ft wide and 5 ft of reach, basically I would choose wide flow for Euphyllias and Gonis, most everything else will do OK in the narrow, but you may want to experiment with what gives the corals the best appearance (most open) and keeps detritus swept up.

If I put it on the back wall the overflow box blocks it. Can it be on the corner of the side wall ?
 
E1046E91-E920-47BF-AD3C-66BF75F37454.jpeg
This is the pic of the tank with the overflow
 

TOP 10 Trending Threads

IF YOU HAD TO OPERATE EVERYTHING ELSE MANUALLY, WHICH AUTOMATED SYSTEM WOULD YOU KEEP?

  • Auto top-off

    Votes: 15 62.5%
  • Automated dosing

    Votes: 0 0.0%
  • Mechanical filtration / roller filter

    Votes: 2 8.3%
  • Automated water testing

    Votes: 0 0.0%
  • Automatic feeding

    Votes: 0 0.0%
  • Lighting schedule

    Votes: 4 16.7%
  • Controller and remote monitoring

    Votes: 2 8.3%
  • Leak detection and emergency shutoff

    Votes: 1 4.2%
  • Automatic water changes

    Votes: 0 0.0%
  • None. I prefer to operate everything manually

    Votes: 0 0.0%
  • Something else (explain in the comments)

    Votes: 0 0.0%
Back
Top
Home
Post thread…
Market
What's new