White spots on female clown

jackandrocco

Active Member
View Badges
Joined
Apr 1, 2025
Messages
159
Reaction score
46
Location
omaha
What state or country do you live in
Nebraska
Rating - 0%
0   0   0
I’ve noticed these little white spots on my female clown fish and they have been popping up more over the days but not on the male clown is this itch or velvet? What should I do? The pictures don’t do it justice but she has tiny white spots across her whole body she’s breathing normally and eating fine and I haven’t seen her rubbing against rocks or anything

IMG_1798.jpeg IMG_1797.jpeg IMG_1796.jpeg IMG_1795.jpeg IMG_1794.jpeg IMG_1792.jpeg IMG_1790.jpeg
 
Hard to tell from photos, maybe the #medics can help more.
 
I’ve noticed these little white spots on my female clown fish and they have been popping up more over the days but not on the male clown is this itch or velvet? What should I do? The pictures don’t do it justice but she has tiny white spots across her whole body she’s breathing normally and eating fine and I haven’t seen her rubbing against rocks or anything

IMG_1798.jpeg IMG_1797.jpeg IMG_1796.jpeg IMG_1795.jpeg IMG_1794.jpeg IMG_1792.jpeg IMG_1790.jpeg
This clown has ich and you will need to place fish in Quarantine tank and treat with Coppersafe or Copper Power at therapeutic level 2.25 for a FULL 30 days (do not interrupt this 30 day period) monitored with a Hanna Brand copper test kit- No API brand. Also monitor Ammonia levels while in quarantine with a reliable test kit and add aeration during treatment using an air stone. All other fish in with it should also be removed as they have also been exposed to the parasites and placed in quarantine tank.
The display tank will have to be kept fishless (FALLOW) for 6-8 weeks to assure the existing parasites go through their life cycle without a host fish and die off. Inverts and coral can remain in the display (not treatment) tank during fallow period.
A quarantine tank can be as simple as a tank from a second hand store, a Rubbermaid type tub or a starter kit from Walmart which most of the needed essentials.
 
This clown has ich and you will need to place fish in Quarantine tank and treat with Coppersafe or Copper Power at therapeutic level 2.25 for a FULL 30 days (do not interrupt this 30 day period) monitored with a Hanna Brand copper test kit- No API brand. Also monitor Ammonia levels while in quarantine with a reliable test kit and add aeration during treatment using an air stone. All other fish in with it should also be removed as they have also been exposed to the parasites and placed in quarantine tank.
The display tank will have to be kept fishless (FALLOW) for 6-8 weeks to assure the existing parasites go through their life cycle without a host fish and die off. Inverts and coral can remain in the display (not treatment) tank during fallow period.
A quarantine tank can be as simple as a tank from a second hand store, a Rubbermaid type tub or a starter kit from Walmart which most of the needed essentials.
In the display tank I have the two clowns snails hermits and a goby and pistol shrimp and an anemone how am I supposed to keep the display tank empty
 
Your going to have to get the fish out and put into qt and treat them
 
Just the fish tho can the shrimp stay in
Only the fish come out and go in QT. Snails and shrimp can stay in the DT. They will die from the copper and are immune to ich.
 
In the display tank I have the two clowns snails hermits and a goby and pistol shrimp and an anemone how am I supposed to keep the display tank empty
No one said empty..... You want to place fish in a separate tank for treatment and leave any coral and inverts in the display tank but no fish in display tank for 60 days
 
I’ve noticed these little white spots on my female clown fish and they have been popping up more over the days but not on the male clown is this itch or velvet? What should I do? The pictures don’t do it justice but she has tiny white spots across her whole body she’s breathing normally and eating fine and I haven’t seen her rubbing against rocks or anything

IMG_1798.jpeg IMG_1797.jpeg IMG_1796.jpeg IMG_1795.jpeg IMG_1794.jpeg IMG_1792.jpeg IMG_1790.jpeg
Ok update for everyone I have a spare 20 gallon and will be setting up the qt tank tmrw and will put the three fish in there
Im
Going to use a spare hob and heater and air stone with new sponge in the hob and I plan to add sea chem stability for sole
Beneficial bacteria and feed pellets with the sea chem garlic stuff and will go out and buy copper power and a copper test kit tmrw and since this is my first time doing this I’m gonna test ammonia and copper daily and do changes when I see ammonia rise

If someone could approve this plan or change it that would be fiery helpful since this is my first Time doing a quarantine tank
 
Ok update for everyone I have a spare 20 gallon and will be setting up the qt tank tmrw and will put the three fish in there
Im
Going to use a spare hob and heater and air stone with new sponge in the hob and I plan to add sea chem stability for sole
Beneficial bacteria and feed pellets with the sea chem garlic stuff and will go out and buy copper power and a copper test kit tmrw and since this is my first time doing this I’m gonna test ammonia and copper daily and do changes when I see ammonia rise

If someone could approve this plan or change it that would be fiery helpful since this is my first Time doing a quarantine tank

That will work, but tine is of the essence, it takes a few days for copper power to work.

One point - copper power will give a false ammonia reading of 0.5 ppm, so don’t worry unless your copper goes higher than that.

Good luck!
 
That will work, but tine is of the essence, it takes a few days for copper power to work.

One point - copper power will give a false ammonia reading of 0.5 ppm, so don’t worry unless your copper goes higher than that.

Good luck!
Ok cool one more question for you or anyone. The three fish are in the qt tank with heater filter air stone and two pvc elbows I added bacteria so far and I got copper power that says to dose to 2.5 ppm for a 20 gallon so ima dose as if it was 18 gallons so like 25 MLs and I’m using a salifert copper test kit that only goes up to <2 while I’m waiting for the Hannah tester to come in the mail. And my local fish store guys who have helped in the past told me to mix metro plex focus and the garlic into the pellets and feed that so I’m gonna feed them for the first time in a bout an hour then dose copper power after the feeding.
Pls let me know if I should change any of this plan
 
That will work, but tine is of the essence, it takes a few days for copper power to work.

One point - copper power will give a false ammonia reading of 0.5 ppm, so don’t worry unless your copper goes higher than that.

Good luck!
Also are you saying when I does the copper there’s gonna be a 0.5 ammonia reading right away? And I plan on testing those two daily and about what level of ammonia should I do a water change like 1ppm or less? And should I do 5 or 10 gallon changes
 
Ok cool one more question for you or anyone. The three fish are in the qt tank with heater filter air stone and two pvc elbows I added bacteria so far and I got copper power that says to dose to 2.5 ppm for a 20 gallon so ima dose as if it was 18 gallons so like 25 MLs and I’m using a salifert copper test kit that only goes up to <2 while I’m waiting for the Hannah tester to come in the mail. And my local fish store guys who have helped in the past told me to mix metro plex focus and the garlic into the pellets and feed that so I’m gonna feed them for the first time in a bout an hour then dose copper power after the feeding.
Pls let me know if I should change any of this plan

Don’t mix metro and food unless you dose it accurately - it needs to be 1% by weight in the food.

You may need to do a 50% dilution with RO water in your copper sample to get the results onto the scale - just multiply your results by 2.
 
I’ve noticed these little white spots on my female clown fish and they have been popping up more over the days but not on the male clown is this itch or velvet? What should I do? The pictures don’t do it justice but she has tiny white spots across her whole body she’s breathing normally and eating fine and I haven’t seen her rubbing against rocks or anything

IMG_1798.jpeg IMG_1797.jpeg IMG_1796.jpeg IMG_1795.jpeg IMG_1794.jpeg IMG_1792.jpeg IMG_1790.jpeg
Update for everyone again thanks for all the help they’ve been in the qt tank for 5 days now and the two clowns are eating like pigs and the female has been very active and her elevated breathing and spots have gotten better and I finally got the goby to eat yesterday and today
 

TOP 10 Trending Threads

HOW MUCH DOES A FISH’S FEEDING REQUIREMENTS AFFECT YOUR STOCKING DECISIONS?

  • A lot! - I avoid fish that require frequent or specialized feeding

    Votes: 18 33.3%
  • Quite a bit, but an automatic feeder can change my answer

    Votes: 7 13.0%
  • It depends on whether my nutrient export can handle it

    Votes: 8 14.8%
  • It depends on how badly I want the fish

    Votes: 11 20.4%
  • Not much. I’m willing to adjust my routine

    Votes: 9 16.7%
  • Not at all. Feeding demands don’t limit my stocking choices

    Votes: 9 16.7%
  • I usually learn about the demanding feeding schedule after buying the fish!

    Votes: 2 3.7%
  • I haven’t really considered this before

    Votes: 4 7.4%
  • Something else (see my comments in the thread)

    Votes: 2 3.7%
Back
Top
Home
Post thread…
Market
What's new