Why is rollermat 1200 using so much fleece?

[TK_KW]

I have reefmat 1200. Love the design and simplicity. My problem is consumption on my second roll. I have it set to lowest advancement setting. It hangs on side of the sump. I have 2 cor 20s that do about 1120gph.

So the first roll consumption is what I expected at about three weeks use. My second roll, well that's concerning. Why is it using so much per day? Nothing has changed regarding feeding, bio load etc.

I've used 60' since I changed the roll this past wednesday

#reefsquad

 

[juiceguy]

I had the same issue with a certain batch of replacement rolls, I was burning through a replacement roll every 10 days! I ordered a few more replacement rolls and and now consumption has gone down drastically, so I do believe there are different micron ratings on certain rolls even though the package doesn't say anything about it being different.

 

[TK_KW]

I had the same issue with a certain batch of replacement rolls, I was burning through a replacement roll every 10 days! I ordered a few more replacement rolls and and now consumption has gone down drastically, so I do believe there are different micron ratings on certain rolls even though the package doesn't say anything about to being different.

Well that's irritating! Jesus for the price of these rolls, a little quality control would be expected.

 

[juiceguy]

Well that's irritating! Jesus for the price of these rolls, a little quality control would be expected.

Tell me about it, I bought 6 rolls when I first purchased the reef mat and 4 more during the X-mas sales season. The 4 that i bought during the sale were the ones that were different, they were burning through 160in a day.

 

[blaxsun]

Your fleece usage shouldn't even be anywhere remotely this high. On my 750XXL with 49 fish I'm averaging less than 60" daily. A few things I'd possibly look at:

1. What do you have your advancement set to? Mine is set to 0.4-0.6" - which seems to yield the best results.
2. Are you running anything in the media caddy? (carbon, bio media, etc.) If so - ditch it. Chances are this has/is clogging up and otherwise restricting your water flow (which can double or even triple fleece usage).

 

[TK_KW]

Your fleece usage shouldn't even be anywhere remotely this high. On my 750XXL with 49 fish I'm averaging less than 60" daily. A few things I'd possibly look at:

1. What do you have your advancement set to? Mine is set to 0.4-0.6" - which seems to yield the best results.
2. Are you running anything in the media caddy? (carbon, bio media, etc.) If so - ditch it. Chances are this has/is clogging up and otherwise restricting your water flow (which can double or even triple fleece usage).

Advancement is set to its lowest. Nothing in bottom tray.

Redsea has advised me to do a factory reset, to rule out a software glitch. So when I went to forget device in my wifi app. I did so but reefmat still showed up in the reefbeat app. so went back to wifi setup, but now i cant reconnect ***.

Does anyway know what the wifi password is for the reefmat once its put into wifi setup mode?

Their process to do a factory reset is pretty ridiculous. Like how can it not be simplified.

 

[blaxsun]

Over the past few days my fleece usage is up about 25% (from the normal 50-60" daily to 70-80"). I recently removed and thoroughly cleaned the ReefWave, but I also did a tremendous amount of in-sump and in-overflow cleaning (specifically, scraping of algae and a ton of spirobid worms) - so I'm expecting this to slowly ramp down a bit.

I also adjusted my gate valve so little (if any) water was trickling down the emergency overflow as I was ending up with a lot more unfiltered crap in my sump than desired. And I added two gyres to the main ReefMat/Bio Media chamber to ensure a lot more flow as well - so chances are a lot of the crap that previously would've lurked is getting blown back into the tank to be re-filtered.

 

[rahre1]

I just had a new mat run 2 days between 160-200” per day. I pulled out the carbon tray in the bottom that I was running Red Sea carbon (in their provided pouch), mat usage immediately plunged to about 30” per day. This may not be your specific problem if your tray is empty, but I hope others don’t experience that much wasted roll because of a flow-through issue in the tray (it was fresh carbon….apparently too much?).

 

[TK_KW]

I just had a new mat run 2 days between 160-200” per day. I pulled out the carbon tray in the bottom that I was running Red Sea carbon (in their provided pouch), mat usage immediately plunged to about 30” per day. This may not be your specific problem if your tray is empty, but I hope others don’t experience that much wasted roll because of a flow-through issue in the tray (it was fresh carbon….apparently too much?).

Mine ended up being a bad set of rolls. Since replacements I had a roll last 41 days. And I have a heavy bio load. So Redses needs to sort out their inconsistencies

 

[Spacedust Reefer]

I noticed the rolls to be very hard, not as clear see through (microns) as rolls prior.
My consumption has been through the roof about 200 inches a day. Never has it been that high and I can attest it that it is the rolls being harder. You can clearly feel and see the difference . Red Sea has quality control issues in their rolls and I’m not too happy about changing rolls every week or so. Feels like a rip off and it’s stripping way too much out of the tank

 

[saltwaterpicaso]

mine used more when i had the advancement at the lowest because there was more dirty filter in the basket at a time creating a higher water level. i have since put it back to stock settings also raising the basket out of the water helps a lot and using preconn filter rolls has me from 80 inches a day to 20 inches a day now consistently i would never use the redsea rolls ever again

 

[MichaelReefer]

Thats crazy, my 500 only goes through 15-20 inches a day on average.

 

[get-salty]

I thought of owning one of these rollers but seems to be a very difficult device and not "Plug N Play" type.
After all, its only one job is FILTER.

Some things are just "Less Is More". Im using filter floss for yrs and everything is A-OKay.

 

[Kooma]

Well that's irritating! Jesus for the price of these rolls, a little quality control would be expected.

Red Sea?

Quality control?




No way…