Will these pvc pipes work to plumb my tank?

  • Thread starter Thread starter AMReef
  • Start date Start date
  • Tagged users Tagged users None

AMReef

Active Member
View Badges
Joined
Oct 23, 2019
Messages
127
Reaction score
62
What state or country do you live in
California
Rating - 0%
0   0   0
Hey all forgive me for this rookie question. I’m still learning plumbing.


My buddy has these and I want to use them to plumb my tank. It’s the right sizes that I need 3/4. These are new left over pieces from his air compressor project, are these the same for our tanks? He said he has no idea. I haven’t seen them he just sent me pictures. Any help is appreciated!

Thank you in advance!

IMG_8287.jpeg IMG_8288.jpeg IMG_8289.jpeg IMG_8290.jpeg
 
To elaborate; the schedule number is essentially a pressure rating, and by proxy; correlates to the thickness of the pipe and fittings. All schedule numbers of commonly available PVC can be used together.

SCH 80: this your thickest/strongest/most expensive plastic plumbing typically available in stores. Usually dark grey in color, The fittings are physically larger in outside dimensions to achieve the higher pressure rating. — schedule 80 pipe itself is also thicker, but the inside diameter is smaller than other schedule numbers of pipe due to this.

SCH 40: most common pressure rated potable water plumbing. Usually white in color, color options exist. Thinner/much less expensive than schedule 80. I like to use this for testing/prototyping, or plumbing I’m not worried about accidentally breaking when I inevitably abuse things moving bulky equipment around…

SCH. 26/10: thin-wall, low pressure pipe; not very strong, but these will have the maximum pipe inside diameter. Excellent for drain pipes inside overflow boxes/etc. I don’t trust it to keep water off my floor for much else though…


You can adapt back and forth between the slip fit and glued pipe/fittings there, and National Pipe Thread (NPT), any tubing size, even metric fittings!

The 3/4in pipe you’ve got there will max out at around 720-900GPH on the return pump side of things; go with 1in diameter for overflow drain(s) if possible to help prevent a plumbing clog! This also lets you upgrade pump flow rates later if you so-choose without redoing all your drain plumbing!


Best of luck, and don’t be afraid to ask if you have further questions!

Jack
 
Thank you all so much!
 
To elaborate; the schedule number is essentially a pressure rating, and by proxy; correlates to the thickness of the pipe and fittings. All schedule numbers of commonly available PVC can be used together.

SCH 80: this your thickest/strongest/most expensive plastic plumbing typically available in stores. Usually dark grey in color, The fittings are physically larger in outside dimensions to achieve the higher pressure rating. — schedule 80 pipe itself is also thicker, but the inside diameter is smaller than other schedule numbers of pipe due to this.

SCH 40: most common pressure rated potable water plumbing. Usually white in color, color options exist. Thinner/much less expensive than schedule 80. I like to use this for testing/prototyping, or plumbing I’m not worried about accidentally breaking when I inevitably abuse things moving bulky equipment around…

SCH. 26/10: thin-wall, low pressure pipe; not very strong, but these will have the maximum pipe inside diameter. Excellent for drain pipes inside overflow boxes/etc. I don’t trust it to keep water off my floor for much else though…


You can adapt back and forth between the slip fit and glued pipe/fittings there, and National Pipe Thread (NPT), any tubing size, even metric fittings!

The 3/4in pipe you’ve got there will max out at around 720-900GPH on the return pump side of things; go with 1in diameter for overflow drain(s) if possible to help prevent a plumbing clog! This also lets you upgrade pump flow rates later if you so-choose without redoing all your drain plumbing!


Best of luck, and don’t be afraid to ask if you have further questions!

Jack
Thank you so much for the breakdown!!
 

TOP 10 Trending Threads

HOW WOULD YOU FEEL ABOUT RECEIVING A FISH OR CORAL AS A HOLIDAY GIFT?

  • I’d love one, as long as it’s a species I chose

    Votes: 26 23.0%
  • I’d trust someone who knows my tank to choose

    Votes: 10 8.8%
  • I’d rather get a gift card and pick it myself

    Votes: 45 39.8%
  • I’d prefer gear or supplies instead

    Votes: 3 2.7%
  • Please don’t surprise me with livestock

    Votes: 29 25.7%
  • Other (Post in the comments)

    Votes: 0 0.0%
Back
Top
Home
Post thread…
Market
What's new