gyre

  1. D

    DIY anemone guard for Red Sea Reefwave 25 /gyre style wavemaker

    Hey fellow reefers, I saw there wasn't a whole lot of information/products on protecting your anemones from gyres so I figured Id share my solution (hopefully, we will see) to this problem. For the RedSea Reefwave, and im sure this works for all other gyre wavemakers, I just went to my local...
  2. Schraufabagel

    Gyre vs regular wave maker?

    I currently use an AI Nero 3 for my 25 gallon peninsula AIO. I am seeing some dead spots since my scape is a cove style, and some detritus builds up there. The wavemaker also channels the flow too much and blows the sand out of a corner until it’s bare. I’m wondering, would using a gyre...
  3. Leon Gorani

    Did I ruin these magnets to my gyre?

    I put my gyre in a tub full of water and some white vinegar to clean the bin and gyre, and now after I took it out it looks like this in my pic. It looks like the magnet cover is peeling off and the glue underneath is showing. I left it in the bin mixing for 24 hours. Could I clean that off and...
  4. alimac122

    Oklahoma ISO Gyre Pumps for 90g cube

    Looking to purchase TWO gyre pumps for my 90g cube system. Willing to trade for a CurrentUSA setup with bluetooth connect LED light bar, two 1200GPH magnetic pumps and one 600GPH magnetic pump. OBO They are GREAT and all work phenomenally, I just have done research and read that gyre pumps...
  5. trmiv

    Florida Maxspect Gyre XF330 dual pump kit and Maxspect ICV6 controller

    Maxspect Gyre XF330 dual pump kit. This includes two xf330s, one controller and one power supply. Bought this as a kit in January 2020 and used until mid-March this year. Would like to sell together as the kit since I purchased them that way. $340 shipped for the kit also have a...
  6. kanders87

    Illinois Basement Clean out - ATO Skimmer lighting

    Selling some stuff that I’m no longer using. All cleaned up and ready to go. Maxspect Razor X RS-150 ($450 OBO) Tunze 9012 Skimmer (SOLD) Hydor controllable pump 1000gph (SOLD) SmartAqua Micro ATO, includes everything you see in the photo. Will need additional tubing. (SOLD) Reef...
  7. R

    Make a switch?

    So I have an IM 50 lagoon. I'm running two ecotch mp10s. There on opposite sides and have some dead spots. Would you consider selling them and getting a gyre instead?
  8. MSarro27

    New Jersey NEW MAXSPECT JUMP 4K

    (BNIB) $200.00 firm local pickup only. Thank you....
  9. M

    Red Sea Reefer 450 and Equipment

    Red Sea Reefer 450 & Equipment Location - Columbus Ohio area Will consider shipping items unless otherwise noted. Have original boxes for most of the equipment Tank and sump (stock sump new condition, never used) - $1500 pick up only Elite Aquatics custom sump and plumbing with gate valves...
  10. fox0521

    125 gal flow help?

    I’m currently using two Tunze 6045 powerheads (circled in red), an MP40 (running 65% reef crest during day, 65% lagoon at night), and my aquastation dc-9000 return pump for flow. You can see pretty clearly on the left side of my tank that I’ve got some low flow/dead zone going on. What’s my best...
  11. RMS18

    New Jersey Aquarium Controller Powerheads Icecap Gyre Interface Modules W/ Y Module Cable

    Hey everyone, I have 2 Icecap gyre interface modules for icecap 3k gyres, each module comes with the Y cable used to connect to your apex. Asking $50 per module and Y cable or $80 for both modules and Y cables.
  12. Jay00498

    Massachusetts Powerheads SOLD 2x Maxspect XF350 with controller

    Used for about 3 months switched to a less powerful gyre . These things are big and push some serious water. Both come with original boxes . $360 plus ship
  13. Jay00498

    Massachusetts Powerheads SOLD Brand new unopened Maxspect XF330 + Controller

    I have a brand new XF 330 gyre + controller unopened from BRS . $260 shipped !
  14. Jay00498

    USA WTB WTB Maxspect XF350 w/ controller

    Looking for a good deal on a Maxspect XF350 w/ controller.
  15. J

    Flow questions.. Gyre and placement.

    Hello, I have an Innovative Marine EXT 100, and using 2 Icecap 2k gyres, one on each end placed in the middle of the side glass, at the top. I am getting great flow around the front of my aquarium, but not really the back behind the rocks. I'm noticing this because I'm having a cyano issue, and...
  16. DaAznGuy

    Texas Powerheads Misc. Pumps Dosing Cleaning out the closet sale

    Found a few items that have been sitting on my closet. All items are in working order. Prices are with shipping for US only. Send me a PM if interested. Bubble Magus Doser Pump $100 BRS top off pump, w new unused tubing $50 Reeflink $55 (2 available) Icecap Gyre 3k $100 each (only 1 has...
  17. Brent Behringer

    California Powerheads Misc. Pumps Brand New ReefWave 25 Pump with Controller (1980 GPH) - Red Sea Features

    Due to Financial and Health reasons I will be parting out my current Reefer 250 Build. I completed the build up to a wet test only. So all equipment is brand new never used except for the wet test of my Tank, Custom Sump and Return Pump (ran for about an hour). Brand New ReefWave 25 Pump with...
  18. Erick Armanii

    Connecticut New York Gauging interest - 2 Maxspect Gyre XF250 and 2 Icecap gyre interface

    Recently upgraded to the vortech world. So I have a pair of lightly used Maxspect Gyre XF250s, 2 icecap gyre interface Modules, and apex cable connections. I set these up in February 2020 bought everything via BRS, marine depot, or Reef2reef, back before my basement flooded and had to do a...
  19. A

    New Mexico Powerheads Apex WAVs and 1Link $350

    I have an Apex WAV setup. Two pumps are almost brand new, used for just a couple of months. I also have an extra pump that works good, just no magnet set-up for it. Of course it has the 1 link and all cables. $350 plus split shipping. Price is pretty firm. Would like to see relatively quick...
  20. Luke023

    Help - Setting up Gyre pumps in a reef tank

    Hi everyone. I have a Redsea 625xxl mixed reef tank. Trying to better understand flow in thr aquarium. Currently I run a decent return pump with a random flow nozzle, meaning my flow is reliant on the two Maxspect gyre pumps on either end of the tank. Looking for advice on what settings...
  21. BighohoReef

    Washington Misc. Pumps Selling: Maxspect Gyre XF350 PUMP ONLY

    $130 + Shipping. Maxspect Gyre XF350 PUMP ONLY NO CONTROLLER. All parts included (Direction covers, nem guards) will come in it's original box. Used to cycle tank for about a 5 weeks. Sells for $180 new.
  22. A

    USA Dry Good Trade Neptune WAVs for gyres

    Looking to trade my Neptune WAV setup for some quality gyres. Got the WAVs with the tank when I bought it but one of the pumps went out so I went ahead about bought two new pumps. Comes with 1Limk control module, two nearly brand new Wav pumps (2 months old or so) and an older pump (no dry...
  23. Plzpizza

    Reefwave 25 reverse flow switch broken!

    So I bought the reefwave a month ago and now am experiencing problems with it suddenly stopping completely when it alternate to reverse flow. I had it on forwards 10% and reverse 20% and it was working normally then out of the blue it stops whenever it switches to reverse. I tried setting a...
  24. Reefer37

    Texas WTB HOB Refugium and IceCap Gyre

    Title says it all! Looking for a nice HOB refugium, preferably nothing too big, it's going on the back of a 45g. Also looking for an IceCap Gyre preferably the 1k, but also interested in the newer 2k. Let me know what you have!
  25. Bryknicks

    Florida Gyre Interface Module for XF130⁄230 Pumps with Alternate Mode Cable

    The IceCap Gyre Interface Module is an after-market product that will allow you to hook up your Maxspect Gyre pump to most 3rd party controllers by using an available 0-10 volt port. This makes the Module very versatile and almost universally compatible with most controllers including the Apex...
Back
Top