vortech mp40

Here's what I have left from a 300g and 180g breakdown. Items located in Nekoosa WI but willing to ship. This is a consolidated list and a re-post of what's left. PUMPS: Maxi-jet w/ wave maker head 3 $5 APEX: Break Out Box 1 $5...

I have a used, but good working Vortech MP40 for sale, as I just don't use it any longer. I am set up with Maxspect Gyre's now. MP40 comes with a 3D printed Nem guard, that actually replaces the OEM cage, not just a cheap slip on. $130 shipped anywhere in lower 48.

I am looking to buy 2 Ecotech Vortech MP40'S with Mobious Newer models or recently purchased ones that were used for a short period of time. I don't want to buy some and then have to worry about buying a new wetside or something in a few months right from the get go. I am looking to pay between...

Downgrade to MP10 because this MP40 is too much flow for my tank, blasted off my acro flesh. Includes free mounting bracket and 3d printed anemone guard. $280 shipped.

Hello— this is my first post so please bear with me. New to the hobby but researching pretty much full time and serious about starting off right. I have a 100g (DT) eShopps Mariner tank on the way, and as a gadget lover I’m enjoying the rabbit holes of various technologies. The Hydros...

I have for sale a several fully working with no issues, EcoTech Marine VorTech MP40wQD Propeller Pumps that are less than 1 year old. Unfortunately I am selling my home and have to break my system down for an undetermined amount of time. The purchase includes the the Pump Dry Side, Pump Wed...

Clearing out some equipment that was year marked for a tank upgrade. All prices shipped. Will accept PayPal or Venmo goods and services. Reefmat 500 with 3 replacement rolls - $275 2x Ecotech MP40wQD mobius - $280each (1 sold, 1 available) 2x Apex PM1 module - SOLD Apex/GHL to Jebao adapter -...

Recently broke down a frag system that was running for about 1 year. Have some EcoTech and Nyos equipment for sale thats in like new condition and all cleaned up. All prices do include free shipping. Ecotech Marine Vectra S2 DC Mobius Ready DC Return Pump with Barb & screen kit $250 SOLD 2x...

I have a couple of items for Sale - all prices include shipping EB832 - $220 Used for less than a year after purchased new - I can't find the mounting bracket. No rust or issues. Never been anywhere near water or the aquarium. MP40 - $300 Used for a year and a half after purchasing new. I...

3-MP40W's dry sides only and driver Wet sides not included. 2010 vintage 3 for $250.00 or $100.00 each Will ship for $20.00

3-MP40W's dry sides only and driver Wet sides not included. 2010 vintage 3 for $250.00 or $100.00 each Pick-up in Gurnee, IL 60031. Will ship for $20.00

Local pick up only on heavy and big equipment. I can work with you on shipping but if its heavy then I will have to split the shipping costs with the buyer. Paypal taxes not included. Brand New Equipment (still sealed or opened to make sure everything is good)...

I shutdown my tank few months ago and I'm taking a break, all equipment is in great working & cosmetic condition. Kessil AP9Xw mounting arm - SOLD Red Sea - ReefDose - Doser 2 Heads with tube kit Used for couple months - like new - SOLD Vortech MP40QD- Möbius ready with extra wet side w/safe...

Two EcoTech MP40 powerheads for sale, $220 each. Each of been used for the past couple years, routinely maintained. Mobius enabled, comes in original boxes with cables. See photos below. Willing to sell and ship separately. Any questions please let me know. PUMP 1 PUMP 2

I have a new Ecotech Vortech MP40 Mobius Ready QuietDrive – purchased from BRS on April 20, 2022 waiting for me to set the Cade up. I took it out of the box 1 week ago to set it up (which is only running saltwater with no nutrients or inhabitants) – The pump works great. Just going with MP60...

HI All, I am selling the following items priced as shipped. If you live in California or NYC you will have to pay extra for shipping. 2 x Apex EL + PH probe + Temp probe with Energy Bar E832 $370 each Probes will be shipped with a damp towel in a ziploc bag. Reeflink $50 2 x Ecotech MP40...

I have the following for sale: Powerheads 1 MP 40’s - 375 shipped - 1 box opened but never used 5 MP 10’s - 300/250 shipped - 3 bnib, 2 lightly used 3 MP 60’s - 700 shipped - bnib Lights 4 XR30 Blue G5 - 650 shipped - bnib Please feel free to message me via dm if you have any questions.

Selling 2x ecotech MP40’s.asking 550$ for both and must pickup in NJ 08820.

Will post pics as arrives and I build. Right now gonna have 2x kessil a360x 2x vortech mp40 Regal 150sss (WOULD LOVE A SUGGESTION ON A BETTER OR EASIER CHOICE) Apex controller

I have been wavering for months on whether this build warrants a R2R build thread but after pulling the trigger over the weekend on a pneumatically actuated salt doser setup for my mixing station, I knew that exchanging ideas and advice related to this project would be highly valuable for myself...

I'll use this thread to keep notes for my future self and maybe somebody will find something useful in here as well. A short intro - I only got into this hobby (aquariums in general that is) around September 2018 and bought my first large (240L) tank December that same year. Spent a few...

I’m debating on getting 2 MP10s or 2 Mp40’s. It would be on a waterbox 70.3 which is about a 45 gallon display tank. I will also have the Nyos viper 5.0 return pump. What should I go with?

I have a gently used MP40WQD for sale, comes with original packaging. Cord sticky tabs unused. It does not come with the original foam guard. Purchased new in April of 2019. Asking $260 shipped.

So, I ventured into that wonderful world of tank upgrades. I upgraded from my 70g cadlights II tank to a Waterbox 5226 peninsula. I'll be the first to say that it was quite challenging and took me nearly all day to do it. I found myself worrying and stressing during the whole process. But...

So a while back I purchased a used MP40. Prior to that I had a MP10QD. The MP40 was significantly noisier. I upgraded the driver to the QD driver. That helped out a lot, but not enough. My question is would upgrading the wet side to the newer version be the next logical step as far as noise...