00W's AIO Smorgasbord

[Kipp's Corals]

What is everyone’s average RODI gallons per hour?

 

[kevgib67]

What is everyone’s average RODI gallons per hour?

At 80 psi it takes one and a half hours to produce 5 gallons.

 

[Kipp's Corals]

At 80 psi it takes one and a half hours to produce 5 gallons.

Okay so I’m right on schedule. I did the math 100GPD. You’re correct it looks like it might be about a gallon short so 1.5 is what my unit is doing.

Figure I’d leave room to dump.

Excellent. Good day
My guess I’ll need just a little more filtration for my remaining 90ppm that my clean water is reading. Still confused about the RODI inline ppm reader

 

[kevgib67]

Okay so I’m right on schedule. I did the math 100GPD. You’re correct it looks like it might be about a gallon short so 1.5 is what my unit is doing.

Figure I’d leave room to dump.

Excellent. Good day
My guess I’ll need just a little more filtration for my remaining 90ppm that my clean water is reading. Still confused about the RODI inline ppm reader

Maybe someone will chime in the inline ppm reader, equipment is not in my wheelhouse.

 

[00W]

What is everyone’s average RODI gallons per hour?

I'm at 2 hours or so for 5 gallons.
28 psi.
No meter so can't help there.
TDS should be 0 going into your clean water bucket as far as I know.

 

[kevgib67]

I'm at 2 hours or so for 5 gallons.
28 psi.
No meter so can't help there.
TDS should be 0 going into your clean water bucket as far as I know.

I’m not the equipment guy but I knew I had to get my psi up so I purchased a booster. You might want to consider getting yours up.

 

[tbrown]

DON'T FOLLOW MY EXAMPLE

I don't use an RO/DI...

 

[Calmwaters]

DON'T FOLLOW MY EXAMPLE

I don't use an RO/DI...

Such a rebel

 

[tbrown]

Such a rebel

Most of the year it works but my alkalinity is pretty high in the winter.

 

[Calmwaters]

Most of the year it works but my alkalinity is pretty high in the winter.

I would be terrified to use non-rodi water

 

[00W]

I’m not the equipment guy but I knew I had to get my psi up so I purchased a booster. You might want to consider getting yours up.

I just have a little ro buddie.
Instructions say not over 35 psi it's just a flow through system from what I understand.

 

[kevgib67]

I just have a little ro buddie.
Instructions say not over 35 psi it's just a flow through system from what I understand.

That’s why I’m not an equipment guy!

 

[00W]

That’s why I’m not an equipment guy!

I did order a tds meter for it today just for fun after the posts about it.
Always learning.
You are the everything guy as far as I'm concerned. ;)

 

[kevgib67]

I did order a tds meter for it today just for fun after the posts about it.
Always learning.
You are the everything guy as far as I'm concerned. ;)

As I stated before, I’m not the fish disease or tech/equipment guy for sure.

 

[fishguy242]

best if inline meter probes are before "in" membrane and after "out" di canister
I run at 100 psi 150gpd membrane only get about 6 gal an hour

 

[00W]

As I stated before, I’m not the fish disease or tech/equipment guy for sure.

Was working on my truck AGAIN when posting but you ARE the equipment man and right in this situation.
My house pressure is 38 when everything is running typo earlier of 28 from my big fat fingers and I just read the ro membrane and it says minimum 35 psi.
Brains are not my strong suit as you know so I am looking into a booster pump right now to make this thing more efficient.
Thank you @kevgib67 once again. :) :star-struck:

 

[00W]

NOTE TO EVERYONE:
ALWAYS READ THE INSTRUCTIONS.

 

[1ocean]

hmm let me think bout this....get back to you on why the reading is like that something must be hooked up wrong if water coming in and water going out id zero...

 

[1ocean]

NOTE TO EVERYONE:
ALWAYS READ THE INSTRUCTIONS.

yep ...i always look for that tag on girls so that I do not mess up...hahahah

 

[00W]

best if inline meter probes are before "in" membrane and after "out" di canister
I run at 100 psi 150gpd membrane only get about 6 gal an hour

Gonna need to pick your brain on install when I get the meter if you don't mind. :)