20230926_180324.jpg

00W's AIO Smorgasbord

Aquarium Profile and Equipment

What type of saltwater aquarium is this?
Mixed Reef
Total Water Volume
115
When did you start this tank?
Jun 16, 2015
What is your aquarium made of?
Glass
Aquarium Length (inches)
48
Aquarium Width (inches)
18
Aquarium Height (inches)
24
Aquarium Overflow/Drain
Drain Style (durso, herbie, etc)
Aquarium Sump
YES
Sump Water Volume
20
Aquarium Stand
Wood
Aquarium Controller
NO
Protein Skimmer
NO
Protein Skimmer Make and Model
Lifereef vs3-24
Aquarium Reactors
  1. None
Return Pump
Eheim compaction 3000
What types of equipment are you using for water flow and circulation?
  1. Powerhead
  2. Wavemaker
Water Flow and Circulation Equipment List
Jebao OW 20 x2, OW10, Jebao 1300, 2 sicce small WaveMaker.
Aquarium Lighting
  1. T5 Fluorescent
  2. Natural Sunlight
Lighting Equipment List
Odyssea T5 HO fixture
Lighting PAR and Goals
Low
Dosing Equipment Detail
None
Auto Top Off or ATO
NO
Aquarium Heating and Cooling
  1. I am using a heater or heaters
Water Temperature
77
Heating and Cooling Equipment Detail
Eheim 300w with ink bird controller

Aquarium Water Chemistry and Parameters

pH Level
8.3
Specific Gravity
1.027
Nitrate or NO3
19
Phosphate or PO4
1.12
Calcium
440
Alkalinity
7
Magnesium
1300
Salt Brand
Red sea blue bucket
Trace Element Dosing
Kent essential elements

Aquarium Natural and Mechanical Filtration

Substrate
Bare Bottom (BB)
Substrate Level
No Substrate
Live Rock
75
Live Rock Type
Unknown
Nutrient Export
  1. Protein Skimmer
  2. Filter Sock
Water Changes
YES
Water Change Details
10% every Monday

Aquarium Tank Inhabitants (fish, coral, invert etc.)

Fish List
  1. Angelfish
  2. Clownfish
  3. Surgeonfish Tang
  4. Other Predatory
Total Fish
4
Coral List
  1. Zoanthids
  2. Soft Coral
  3. Mushroom Coral
  4. Other
Total Corals
6
Invert List
  1. Anemone
  2. Snails
  3. None
Total Inverts
0
Livestock Detail
Have a trigger which is not listed.
Livestock Quarantine
  1. No Quarantine

Aquarium Nutrition (fish, coral, invert etc. feeding)

Fish Feeding Frequency
Multiple Daily Feedings
Coral Feeding Frequency
Do Not Feed Coral Directly
Fish and Coral Feeding
  1. Flake
  2. Pellet
  3. Frozen
  4. Algae Strips
  5. Other
Auto Feeder
NO

Additional Aquarium Information

What do you think are the keys to your success in reefing?
Patience
Looks like my corals finally departed from Indiana, and are landing in Louisville in a few minutes. Then it'll catch a flight to Albany at 3am, and then hopefully be here early in the morning. I really hope they survived, and if they did, I hope they cab tolerate the lower mag for a day
 
Looks like my corals finally departed from Indiana, and are landing in Louisville in a few minutes. Then it'll catch a flight to Albany at 3am, and then hopefully be here early in the morning. I really hope they survived, and if they did, I hope they cab tolerate the lower mag for a day
It has been that low for longer than a day, so the next 24 hours shouldn't make or break them. I've had two back to back shipments get stuck in Kentucky (that sounds like a country song), and haven't lost a coral. Several of those were sps. They were packed perfectly, so there's that factor as well. I'd remain hopeful and contact the seller immediately of any doas. I take pics no matter what the coral looks like to me, just in case. Review your seller's policy and be ready with any evidence of loss.
 
Holy mole Smorgs I’m feeling wiped and a little overwhelmed. To much excitement and stimulus.
I’m not going to be very active on her for awhile.
I’ve bit off almost more than I can chew but it’s very exciting and shocking what has transpired in my world the last week.
The amazing people Ive met and been introduced to that want to do whatever they can to help me succeed at an ornamental aquaculture on larger scale.
I’ll try to keep y’all posted on developments as they happen.
I love Y’all and hope you y’all are being happy filled with love and joy and keep on smorging without me for a few more days…lol

We are always here for you my friend!
Always.
 
It has been that low for longer than a day, so the next 24 hours shouldn't make or break them. I've had two back to back shipments get stuck in Kentucky (that sounds like a country song), and haven't lost a coral. Several of those were sps. They were packed perfectly, so there's that factor as well. I'd remain hopeful and contact the seller immediately of any doas. I take pics no matter what the coral looks like to me, just in case. Review your seller's policy and be ready with any evidence of loss.
Well said John!
They should be fine @WalkerLovesTheOcean
Don't worry.
Temp, salinity, light, little bit of alk is all they care about at first.
 
It has been that low for longer than a day, so the next 24 hours shouldn't make or break them. I've had two back to back shipments get stuck in Kentucky (that sounds like a country song), and haven't lost a coral. Several of those were sps. They were packed perfectly, so there's that factor as well. I'd remain hopeful and contact the seller immediately of any doas. I take pics no matter what the coral looks like to me, just in case. Review your seller's policy and be ready with any evidence of loss.

Well said John!
They should be fine @WalkerLovesTheOcean
Don't worry.
Temp, salinity, light, little bit of alk is all they care about at first.
Thanks! You all are making me feel optimistic. I really need a reefing miracle right now, because these past few days in my tank has been real rough.
 
Thanks! You all are making me feel optimistic. I really need a reefing miracle right now, because these past few days in my tank has been real rough.
You definitely have to have ups to counter the downs, or it's easy to get discouraged.
When I had my delays, I just floated the bags to acclimate temperature. They came from a reputable source that I'd dealt with before, so I didn't dip them. Usually, I always dip new corals. I checked the salinity and found it to be very close or the same, so I didn't drip acclimate. They went to a lower flow/light area for a bit before I started putting them where my eye wanted them.
What corals are you waiting on?
 
You definitely have to have ups to counter the downs, or it's easy to get discouraged.
When I had my delays, I just floated the bags to acclimate temperature. They came from a reputable source that I'd dealt with before, so I didn't dip them. Usually, I always dip new corals. I checked the salinity and found it to be very close or the same, so I didn't drip acclimate. They went to a lower flow/light area for a bit before I started putting them where my eye wanted them.
What corals are you waiting on?
A frag of zoas and an acan lord. Pretty resilient corals.
 
A frag of zoas and an acan lord. Pretty resilient corals.
Should be just fine Walker!
Zoas are pretty tough.
Crossing fingers for ya I think every little things gonna be alright.
We all struggle in this hobby at times, no matter what anyone says.
My tank has been giving me fits for months but I decided a couple of days ago I wasn't going to let it beat me lol.
I understand.
You'll be back up in no time.
No time at all.
 
Should be just fine Walker!
Zoas are pretty tough.
Crossing fingers for ya I think every little things gonna be alright.
We all struggle in this hobby at times, no matter what anyone says.
My tank has been giving me fits for months but I decided a couple of days ago I wasn't going to let it beat me lol.
I understand.
You'll be back up in no time.
No time at all.
I could see your determination in all the work you did today, Joel. I'm sure pulling for you buddy.
 
I could see your determination in all the work you did today, Joel. I'm sure pulling for you buddy.
Thanks John!
No matter how long I do this, sometimes things are just a pain in the butt, even if you don't want to you have to anyways.
Sounds a lot like life I guess. ;)
Thanks for the support.
Tank looks better now.
 
Who is the plumbing guru of the group!?

I’m building my 125G still and bought a bunch of 1 inch plumbing parts to match my overflow. Rookie mistake, I didn’t confirm that my return pump (maxspect 10K ) only has attachments for 1 1/4 and 1 1/2 barb couplings.

I want to go from barb to pvc at the return to reduce friction. How can I reduce the pump down to 1 inch, I know it’ll kill flow but I should still have enough if I reduce down.

Thanks.
IMG_3409.jpeg
 

TOP 10 Trending Threads

WHICH PART OF YOUR SETUP IS HARDEST TO REACH OR REMOVE FOR ROUTINE MAINTENANCE?

  • Glass behind or beside the tank

    Votes: 6 31.6%
  • Powerheads or wavemakers

    Votes: 2 10.5%
  • Sump or rear filtration chambers

    Votes: 2 10.5%
  • Skimmer or other filtration equipment

    Votes: 1 5.3%
  • Overflow or plumbing

    Votes: 5 26.3%
  • Lights or lids

    Votes: 0 0.0%
  • Mine is pretty easy to access!

    Votes: 2 10.5%
  • Other—tell us what I missed

    Votes: 1 5.3%
Back
Top
Home
Post thread…
Market
What's new