20230926_180324.jpg

00W's AIO Smorgasbord

Aquarium Profile and Equipment

What type of saltwater aquarium is this?
Mixed Reef
Total Water Volume
115
When did you start this tank?
Jun 16, 2015
What is your aquarium made of?
Glass
Aquarium Length (inches)
48
Aquarium Width (inches)
18
Aquarium Height (inches)
24
Aquarium Overflow/Drain
Drain Style (durso, herbie, etc)
Aquarium Sump
YES
Sump Water Volume
20
Aquarium Stand
Wood
Aquarium Controller
NO
Protein Skimmer
NO
Protein Skimmer Make and Model
Lifereef vs3-24
Aquarium Reactors
  1. None
Return Pump
Eheim compaction 3000
What types of equipment are you using for water flow and circulation?
  1. Powerhead
  2. Wavemaker
Water Flow and Circulation Equipment List
Jebao OW 20 x2, OW10, Jebao 1300, 2 sicce small WaveMaker.
Aquarium Lighting
  1. T5 Fluorescent
  2. Natural Sunlight
Lighting Equipment List
Odyssea T5 HO fixture
Lighting PAR and Goals
Low
Dosing Equipment Detail
None
Auto Top Off or ATO
NO
Aquarium Heating and Cooling
  1. I am using a heater or heaters
Water Temperature
77
Heating and Cooling Equipment Detail
Eheim 300w with ink bird controller

Aquarium Water Chemistry and Parameters

pH Level
8.3
Specific Gravity
1.027
Nitrate or NO3
19
Phosphate or PO4
1.12
Calcium
440
Alkalinity
7
Magnesium
1300
Salt Brand
Red sea blue bucket
Trace Element Dosing
Kent essential elements

Aquarium Natural and Mechanical Filtration

Substrate
Bare Bottom (BB)
Substrate Level
No Substrate
Live Rock
75
Live Rock Type
Unknown
Nutrient Export
  1. Protein Skimmer
  2. Filter Sock
Water Changes
YES
Water Change Details
10% every Monday

Aquarium Tank Inhabitants (fish, coral, invert etc.)

Fish List
  1. Angelfish
  2. Clownfish
  3. Surgeonfish Tang
  4. Other Predatory
Total Fish
4
Coral List
  1. Zoanthids
  2. Soft Coral
  3. Mushroom Coral
  4. Other
Total Corals
6
Invert List
  1. Anemone
  2. Snails
  3. None
Total Inverts
0
Livestock Detail
Have a trigger which is not listed.
Livestock Quarantine
  1. No Quarantine

Aquarium Nutrition (fish, coral, invert etc. feeding)

Fish Feeding Frequency
Multiple Daily Feedings
Coral Feeding Frequency
Do Not Feed Coral Directly
Fish and Coral Feeding
  1. Flake
  2. Pellet
  3. Frozen
  4. Algae Strips
  5. Other
Auto Feeder
NO

Additional Aquarium Information

What do you think are the keys to your success in reefing?
Patience
Hello family!
I just got home from having surgery today. I had a small mass in the right side of my groin. They also removed three lymph nodes to send to pathology.
I didn't want to worry any of you, so I decided to tell you afterwards. Its not concerning for cancer, so please don't worry. They are unclear if the mass is from toxic exposure in the military. Hopefully the pathology report will give us a hint.

Much love to all my Smorg family and I apologize for not telling you all sooner.
Don't stress Rock. Just share what you are comfortable sharing. We'll listen, no judgements about what's private for you
 
So a little less then half a cup gradually?
NO.
from the beginning most mixes are 1/2C to 1Gal RO. Since you already mixed, just add maybe a table spoon, kettle it mix then check. then if still low add another table spoon, mix, measure etc...If it goes too high, you could dilute with more straight RO. I think you said you started with 15gal this morning. so the typical mix would be fifteen 1/2 cups of salt to those 15 gallons. But adding less would be better so you can tweak it later to your desired level. but if you have 15 gallons at 1.022SG, you need to add more salt. match it to what your tank measures.
 
How much more salt do I add?
If it's 15 gallons, the calculation comes out to 2 and a half cups, but don't add that. Add 1 cup, wait a while, and measure again to see how much it went up.
 
the winning 3D Printer was a Creality K2 Pro Combo CFS. the kids really need color choices. I figured what the Hay since I just got this big promotion at work.
Congratulations Paul!
Congratulations Congrats GIF
 
the winning 3D Printer was a Creality K2 Pro Combo CFS. the kids really need color choices. I figured what the Hay since I just got this big promotion at work.
Sorry, I missed this. Congratulations on the new promotion and the new 3D printer!
 
Im mixing 18 gallons currently.. but I'm doing a 15 gallon change
To verify the calculations, what salt are you using? Sorry if you already said this, but I don't remember, Instant Ocean?
 
To verify the calculations, what salt are you using? Sorry if you already said this, but I don't remember, Instant Ocean?
Instant ocean yes.
 
the winning 3D Printer was a Creality K2 Pro Combo CFS. the kids really need color choices. I figured what the Hay since I just got this big promotion at work.
Congratulations!!
 
the winning 3D Printer was a Creality K2 Pro Combo CFS. the kids really need color choices. I figured what the Hay since I just got this big promotion at work.
Congratulations!
 
So clear consensus.. add a tablespoon.
I don't think a tablespoon will make a difference in 15 gallons, but try it and we all can see what happens, It's better to go slowly than to go too far and have to add more RO water
 
the winning 3D Printer was a Creality K2 Pro Combo CFS. the kids really need color choices. I figured what the Hay since I just got this big promotion at work.
Great choice but I think you exceeded your original price point by a tad.
 
I added a tbsp.. sadley I won't be able to hit my schedule but a day late is fine I guess. This weekend I'll do another 20 gallon change to make up for this.
 

TOP 10 Trending Threads

WHEN NUISANCE ALGAE OR CYANO FIRST APPEARS, WHAT DO YOU DO FIRST?

  • Manually remove it and observe

    Votes: 2 11.1%
  • Retest nutrients and other parameters

    Votes: 2 11.1%
  • Adjust flow or lighting

    Votes: 0 0.0%
  • Reduce or change feeding

    Votes: 0 0.0%
  • Add or strengthen the cleanup crew

    Votes: 3 16.7%
  • Improve filtration or nutrient export

    Votes: 0 0.0%
  • Use a targeted treatment

    Votes: 0 0.0%
  • Wait and let the tank find its balance

    Votes: 8 44.4%
  • Phone a friend...

    Votes: 0 0.0%
  • It depends (explain in the comments)

    Votes: 3 16.7%
Back
Top
Home
Post thread…
Market
What's new