20230926_180324.jpg

00W's AIO Smorgasbord

Aquarium Profile and Equipment

What type of saltwater aquarium is this?
Mixed Reef
Total Water Volume
115
When did you start this tank?
Jun 16, 2015
What is your aquarium made of?
Glass
Aquarium Length (inches)
48
Aquarium Width (inches)
18
Aquarium Height (inches)
24
Aquarium Overflow/Drain
Drain Style (durso, herbie, etc)
Aquarium Sump
YES
Sump Water Volume
20
Aquarium Stand
Wood
Aquarium Controller
NO
Protein Skimmer
NO
Protein Skimmer Make and Model
Lifereef vs3-24
Aquarium Reactors
  1. None
Return Pump
Eheim compaction 3000
What types of equipment are you using for water flow and circulation?
  1. Powerhead
  2. Wavemaker
Water Flow and Circulation Equipment List
Jebao OW 20 x2, OW10, Jebao 1300, 2 sicce small WaveMaker.
Aquarium Lighting
  1. T5 Fluorescent
  2. Natural Sunlight
Lighting Equipment List
Odyssea T5 HO fixture
Lighting PAR and Goals
Low
Dosing Equipment Detail
None
Auto Top Off or ATO
NO
Aquarium Heating and Cooling
  1. I am using a heater or heaters
Water Temperature
77
Heating and Cooling Equipment Detail
Eheim 300w with ink bird controller

Aquarium Water Chemistry and Parameters

pH Level
8.3
Specific Gravity
1.027
Nitrate or NO3
19
Phosphate or PO4
1.12
Calcium
440
Alkalinity
7
Magnesium
1300
Salt Brand
Red sea blue bucket
Trace Element Dosing
Kent essential elements

Aquarium Natural and Mechanical Filtration

Substrate
Bare Bottom (BB)
Substrate Level
No Substrate
Live Rock
75
Live Rock Type
Unknown
Nutrient Export
  1. Protein Skimmer
  2. Filter Sock
Water Changes
YES
Water Change Details
10% every Monday

Aquarium Tank Inhabitants (fish, coral, invert etc.)

Fish List
  1. Angelfish
  2. Clownfish
  3. Surgeonfish Tang
  4. Other Predatory
Total Fish
4
Coral List
  1. Zoanthids
  2. Soft Coral
  3. Mushroom Coral
  4. Other
Total Corals
6
Invert List
  1. Anemone
  2. Snails
  3. None
Total Inverts
0
Livestock Detail
Have a trigger which is not listed.
Livestock Quarantine
  1. No Quarantine

Aquarium Nutrition (fish, coral, invert etc. feeding)

Fish Feeding Frequency
Multiple Daily Feedings
Coral Feeding Frequency
Do Not Feed Coral Directly
Fish and Coral Feeding
  1. Flake
  2. Pellet
  3. Frozen
  4. Algae Strips
  5. Other
Auto Feeder
NO

Additional Aquarium Information

What do you think are the keys to your success in reefing?
Patience
This is good advice. See? This is why I need you all.
Just do it like this... Honey you know my birthday is next month right? Well there is this amazing once in a lifetime coral that I really want and I'm afraid it will get sold before my birthday. Would you be ok with me getting it as an early gift? 😁
 
Just do it like this... Honey you know my birthday is next month right? Well there is this amazing once in a lifetime coral that I really want and I'm afraid it will get sold before my birthday. Would you be ok with me getting it as an early gift? 😁
Epix Invest GIF by Britannia
 
They finally brought Yuengling to Michigan. Before, I used to go down to Ohio just to buy it!
Decades ago we had go to PA to get it. Everyone was excited when it came to Ohio.
 
Just do it like this... Honey you know my birthday is next month right? Well there is this amazing once in a lifetime coral that I really want and I'm afraid it will get sold before my birthday. Would you be ok with me getting it as an early gift? 😁
And here we were thinking WE were the Enablers....

Boys we have our work cut out for us with this one!

Now if I can just get her to pay for it for me 🤔
 
So @That Crusso Kid do you think you can come up with something for a holder?
If he hasn't answered you yet, the short answer is yes, but unfortunately our printers don't go up to 11" prints. Yours would likely need to be closer to 12" diameter for the weight of it.

Multiple piece print would be necessary and making them connect and be stable is the big hurdle there I'd say.

Possible though, absolutely!
 
If he hasn't answered you yet, the short answer is yes, but unfortunately our printers don't go up to 11" prints. Yours would likely need to be closer to 12" diameter for the weight of it.

Multiple piece print would be necessary and making them connect and be stable is the big hurdle there I'd say.

Possible though, absolutely!
Thank you
 

TOP 10 Trending Threads

ARE YOU READY TO CONFESS TO CRAZIEST, DUMBEST, FUNNIEST THING YOU’VE EVER DONE IN REEFING?

  • Yeah, I'll confess! (Share your story in the comments!)

    Votes: 68 56.7%
  • Nah, I'll keep mine a secret...(Don't be like that, share with the class!)

    Votes: 52 43.3%
Back
Top
Home
Post thread…
Market
What's new