10+ foot tank considerations?

  • Thread starter Thread starter lakai
  • Start date Start date
  • Tagged users Tagged users None

lakai

Well-Known Member
View Badges
Joined
Sep 22, 2018
Messages
883
Reaction score
869
What state or country do you live in
California
Rating - 0%
0   1   0
I currently have a 220 gallon 72x30x24 peninsula and looking to upgrade to either 10 foot 120x36x31 or 12 foot 144x36x31 non-peninsula. I'm curious for those who have similar tank sizes on how best to configure the tank build based on your experience. It will be glass and eurobraced for a SPS tank.

Are there things you would do differently that would have made maintenance easier?

overflow type ? external/c2c/etc.

Did you wish you would have gotten it drilled for closed loop?

how many return lines?

I have a 60" sump, is that enough for a tank double my current size ?

Thanks in advance.
 
While I do not have a tank this large currently I used to maintain an 8x4x4 Reef at the LFS I worked at and I helped install some 22 x 3 x 5 Swim tanks.

Water movement is extremely difficult with tanks this large. The 22 ft tanks had closed loops and this is likely how would go if I had a reef that long. There just isn't a great way to get water movement that far down a tank without a closed loop. The Reef tank was peninsula style with 2 return lines. both coming through sea swirls with educators on the far end of the tank opposite the overflow. I liked this set up because it was fairly unobtrusive while adding flow to the far end.
 
While I do not have a tank this large currently I used to maintain an 8x4x4 Reef at the LFS I worked at and I helped install some 22 x 3 x 5 Swim tanks.

Water movement is extremely difficult with tanks this large. The 22 ft tanks had closed loops and this is likely how would go if I had a reef that long. There just isn't a great way to get water movement that far down a tank without a closed loop. The Reef tank was peninsula style with 2 return lines. both coming through sea swirls with educators on the far end of the tank opposite the overflow. I liked this set up because it was fairly unobtrusive while adding flow to the far end.
I was thinking 4 mp60's and reuse my 4 mp40's, its not necessary to go all the way down the length unless its a peninsula right ?
 
I would only run the returns all the way down the length for a pinensula. I really feel that powerheads on the far end of a pinensula ruin the look.
 
Check out the world wide coral 1000 gallon tank video. The hydro wizards are worth the investment… if you don’t want a Cl
 

HOW MUCH DOES A FISH’S FEEDING REQUIREMENTS AFFECT YOUR STOCKING DECISIONS?

  • A lot! - I avoid fish that require frequent or specialized feeding

    Votes: 5 29.4%
  • Quite a bit, but an automatic feeder can change my answer

    Votes: 3 17.6%
  • It depends on whether my nutrient export can handle it

    Votes: 3 17.6%
  • It depends on how badly I want the fish

    Votes: 5 29.4%
  • Not much. I’m willing to adjust my routine

    Votes: 4 23.5%
  • Not at all. Feeding demands don’t limit my stocking choices

    Votes: 4 23.5%
  • I usually learn about the demanding feeding schedule after buying the fish!

    Votes: 1 5.9%
  • I haven’t really considered this before

    Votes: 0 0.0%
  • Something else (see my comments in the thread)

    Votes: 0 0.0%
Back
Top
Home
Post thread…
Market
What's new