Nice build. I should have made my 40 breeder a peninsula. Good idea there.
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Thanks, originally it was supposed to be a 120, the i hurt my back so I used what I had. Kinda excited to see it finally done some day.Nice build. I should have made my 40 breeder a peninsula. Good idea there.
ThanksNice work on the plumbing and sump.
Just plugged in the power cable and connected it to my home network. Ran the tubing how I want to utilize it and that was all. Channel 1 is Alk, channel 2 Cal and channel 4 Acropower.looking good man, i wish i had your diy skills. this build sounds like it's going to be pretty sweet
did you get your coralbox doser going? i have mine in place and going, but it scares me so i'm going to run it dosing rodi for a bit to see if it stays accurate, but so far so good. i have like a phobia or something when it comes to dosing stuff to my tank lol
Nicee. Did you drill holes in the pvc so you don’t back siphon or how are you combating that?I did buy a 3/4" barbed splicer today to connect my 3/4" hose to the other hose I already have. Put this together the other day for filling my tanks with either top off for the tanks that don't have ATO's installed or with fresh saltwater from the storage/mixing barrels.
Just plugged in the power cable and connected it to my home network. Ran the tubing how I want to utilize it and that was all. Channel 1 is Alk, channel 2 Cal and channel 4 Acropower.
I forgot to order a tubing holder for the top of the tank, so I'll probably either make one or see if I can add on to a mini reactor that I ordered from BRS this morning.
Couple "L" brackets and smoked gray acrylic shelf with transparent red lip, lol. It would look nice if you could see it. Pic for reference:
Not yet, I'll probably drill a small hole on the front side facing the water or I may just leave it. I'll try it out first without. I'm thinking with the ball valve there won't be much of a back siphon happening.Nicee. Did you drill holes in the pvc so you don’t back siphon or how are you combating that?
I'll be playing with mine tonight, I'll keep you posted.nice, i've never done a doser before so i've been letting it dose rodi into some vials to see how accurate it stays for a few days..
mostly i'm putting off navigating to the back of the sump to attach the tubes and tube holder thing
Oh good call.Not yet, I'll probably drill a small hole on the front side facing the water or I may just leave it. I'll try it out first without. I'm thinking with the ball valve there won't be much of a back siphon happening.
No hole needed, I just close the valve and she's good to go. Tested tonight.Oh good call.
Made a tubing holder plate out of smoked gray acrylic. Calibrated the doser and all seems ok so far. Other than it losing connection here and there it's alright I guess.I'll be playing with mine tonight, I'll keep you posted.
This is on a biocube by the way, in case anyones wondering.Made a tubing holder plate out of smoked gray acrylic. Calibrated the doser and all seems ok so far. Other than it losing connection here and there it's alright I guess.
Yea, I have a really strong network here as that's what I have a degree in, lol. Get what you pay for I guess.yeah i can't get mine to pair to my home wifi, so i have to switch over on my phone to the aqua dosing app
and sometimes it just doesn't like to connect. annoying, but hopefully it's not something you have to tinker with often
Some filters
Yea, I have a really strong network here as that's what I have a degree in, lol. Get what you pay for I guess.