About 3 months ago my stirring motor went out on the reefbot and I finally was able to fix it couple of days ago! Back to easy testing, I’m excited! I feel like I am a reefbot engineer now... lots of work of disassembling and reassembling went into this project...
ReefKinetics were able to help out with the process.
My alk is around 8dkh
Nitrates around 5ppm , I’ve turned down slimmer. Want to raise it up to 10ppm
Phosphates 0.02-0.04Ppm
Magnesium 1360ppm (I’ll be dosing a bit extra today to get it upto 1400 or so)
cal- 480ppm
I’ve yet to hook up reactor for purit, it’s for preventative/ precautionary type of method.
To remove any contamination’s like metals etc...
ReefKinetics were able to help out with the process.
My alk is around 8dkh
Nitrates around 5ppm , I’ve turned down slimmer. Want to raise it up to 10ppm
Phosphates 0.02-0.04Ppm
Magnesium 1360ppm (I’ll be dosing a bit extra today to get it upto 1400 or so)
cal- 480ppm
I’ve yet to hook up reactor for purit, it’s for preventative/ precautionary type of method.
To remove any contamination’s like metals etc...