10ft Tank Build

Tank is in and it looks amazing.
Now to start the plumbing.

4 drains in external overflow box for bean animal.
Can I split each full syphon with an T after gate valve into 2x rollers? @BeanAnimal
Planning on 4 rollers if I can, if not would consider 2 or just putting the water into the sump then pumping into rollers.

4x returns, will be combined into 2.



PXL_20261120_015233794.jpg
Good luck with the plumbing! Tank looks amazing on the stand!
 
Ok. Plumbing has started.

My aim is to have all at unions I can over the sump in case of any leaks. I should be able to do that except for the flow meter, there is just not enough room to make it work unless its over the floor or the plumbing becomes very inefficient. I also want to leave enough pipe for future modifications - i.e replacement pumps etc. I may look at pumps with 0-10v control in the future - maybe reef octo varios 10, but that will be something after tank is up and going.

First return loop is complete, pump --> check valve --> flow meter --> through wall --> chiller --> uv --> back through wall --> split --> tank.
All the plumbing is 40mm (Australian pressure pipe with its weird measurements- OD is close to 48mm/2") and then goes down to 25mm at the bulk heads. Only planning on about 3-4000lph for this loop, the chiller and uv will work well on same flow rate.

The second pump will go up and straight into the bulk heads on the other side, that pump will do the bulk of the water movement. I wont have any manifold off either loop, ill either use a dedicated pump + manifold or retrofit later if I want to go down that path.
On my last tank I never used the manifold and dont have any plans to use one on this tank either.
PXL_20261121_045733808.MP.jpg
PXL_20261121_045738900.jpg
PXL_20261121_050237518.jpg



Playing around with the 4 rollers, with the bracing they don't all fit on the end (by about 1cm), which is a shame, I'm thinking 2 on the end, 2 on the back (only 3 in the pictures as one is in use on my temp tank), T piece from each full syphon, will cut the elbow's off the rollers and the 25mm pipe out the t piece is the perfect size for a slip fit. I will leave me enough room for the skimmer and any skimmer upgrade too.
PXL_20261120_104205376.MP.jpg
PXL_20261120_104205376.MP.jpg
PXL_20261121_022658821.MP.jpg
PXL_20261121_022720082.MP.jpg
 
Tank is in and it looks amazing.
Now to start the plumbing.

4 drains in external overflow box for bean animal.
Can I split each full syphon with an T after gate valve into 2x rollers? @BeanAnimal
Planning on 4 rollers if I can, if not would consider 2 or just putting the water into the sump then pumping into rollers.

4x returns, will be combined into 2.



PXL_20261120_015233794.jpg
giphy.gif
 

TOP 10 Trending Threads

HOW WOULD YOU FEEL ABOUT RECEIVING A FISH OR CORAL AS A HOLIDAY GIFT?

  • I’d love one, as long as it’s a species I chose

    Votes: 22 26.5%
  • I’d trust someone who knows my tank to choose

    Votes: 8 9.6%
  • I’d rather get a gift card and pick it myself

    Votes: 30 36.1%
  • I’d prefer gear or supplies instead

    Votes: 2 2.4%
  • Please don’t surprise me with livestock

    Votes: 21 25.3%
  • Other (Post in the comments)

    Votes: 0 0.0%
Back
Top
Home
Post thread…
Market
What's new