125 - Took Forever But Here It is!

[907_Reefer]

My next tank will have a controller, but I'm not set on which yet. Where are you on Hydros? :thinking-face:

 

[tbrown]

Oh yeah, good news (I hope). I turned off the "spotlight" Noopsyche Mini V3 that was over my Judge Judy and Pink Cadillac. This morning, the Pink Cadillac was turning green so the color is coming back. Hopefully it's not too late for the Judge Judy Mille. I may have been overcooking them?

 

[tbrown]

My next tank will have a controller, but I'm not set on which yet. Where are you on Hydros? :thinking-face:

I have 0 controllers at this time beyond the doser and Inkbird heater controller.

 

[stoney7713]

I'm not as interested in a controller as I am automated testing. I have wifi switches and wifi enabled pumps and that's enough.

 

[tbrown]

I'm not as interested in a controller as I am automated testing. I have wifi switches and wifi enabled pumps and that's enough.

My pumps are WiFi because of the controllable plugs. Automated testing is more what I'd want the Neptune or something for.

 

[stoney7713]

I have 0 controllers at this time beyond the doser and Inkbird heater controller.

Umm de wife?

 

[tbrown]

If my wife was in charge I'd have 0 tanks and no need for a controller...

 

[stoney7713]

My pumps are WiFi because of the controllable plugs. Automated testing is more what I'd want the Neptune or something for.

Is it the mastertronic that you can setup with regular test kits? I was looking at it awhile back.

But yeah the Trident being tied to the Neptune in the end costs about the same.

 

[stoney7713]

If my wife was in charge I'd have 0 tanks and no need for a controller...

She actually likes them but can't tell you that for fear you would fill the master bath with fish too...

 

[F i s h y]

my brain always reads your name as steve cheeseburger... sorry not sorry :)

 

[Stang67]

I'm so petty... I just won a tank on here and then I go see I didn't win anything on the Tanksgiving giveaway and I get all sad... What kind of a person am I??!?!!?

You give as much as you get tho.
Well not really or else you'd have nothing but you do share the love. With yourself mostly but sometimes others get to bask in your glowing generosity. Not often though. Forget it.

 

[tbrown]

 

[rmorris_14]

my brain always reads your name as steve cheeseburger... sorry not sorry :)

Sloppy seconds mmmmmmmmm :drooling-face:

 

[Slocke]

my brain always reads your name as steve cheeseburger... sorry not sorry :)

Steve Cheeseburger seems like a cool dude

 

[Slocke]

But I think deep down Mr. Cheeseburger is really an introspective soul…

 

[Stang67]

Not ai

 

[tbrown]

Good old Steve the Hamburglar.

 

[tbrown]

Edit to add TLDR:

If you don't want the long version, here's the short.

I messed up, fixed things, made adjustments, started printing again.

Ok... I mentioned it on another thread (sorry @Fish Styx or should I apologize to @BeanAnimal for pushing his thread to the top again?) but the 3D printer printed a blob into the nozzle. Got that all cleaned up and watched a few more YouTube videos. Leveled the bed per the directions given by Rick Impey (thanks for recommending this guy @stoney7713 !) and ran the auto level. THEN I saved the leveling settings and updated my Gcode to use those settings. :face-with-rolling-eyes: Changed a couple of speed settings and temperature settings, made the adhesion type a skirt instead of a brim, updated my TweakAtZ plugin and started a print.

I think I still need to rerun a couple of calibration models but I want to change from the "free sample" Creality to the Sunlu that we purchased first. I'm printing 2 of these for my wife currently. Printed 3 Thursday night and the third failed and plugged up the nozzle.

 

[billyocean]

Good old Steve the Hamburglar.

It's official...Stevie Chee has arrived

 

[Mschmidt]

Edit to add TLDR:

If you don't want the long version, here's the short.

I messed up, fixed things, made adjustments, started printing again.

Ok... I mentioned it on another thread (sorry @Fish Styx or should I apologize to @BeanAnimal for pushing his thread to the top again?) but the 3D printer printed a blob into the nozzle. Got that all cleaned up and watched a few more YouTube videos. Leveled the bed per the directions given by Rick Impey (thanks for recommending this guy @stoney7713 !) and ran the auto level. THEN I saved the leveling settings and updated my Gcode to use those settings. :face-with-rolling-eyes: Changed a couple of speed settings and temperature settings, made the adhesion type a skirt instead of a brim, updated my TweakAtZ plugin and started a print.

I think I still need to rerun a couple of calibration models but I want to change from the "free sample" Creality to the Sunlu that we purchased first. I'm printing 2 of these for my wife currently. Printed 3 Thursday night and the third failed and plugged up the nozzle.

Nativity scenes?