6125 parts needed

[goody]

I have two used 6125 powerheads that came on some sea sweeps I bought. I have swapped out the 6125s for the smaller 6025s because I ended up going with a smaller tank than planned.

I want to sell the 6125s but they only have the silencer clamp, no silicone buffers or magnets because they were attached to the sea sweeps.
Do you know the part numbers of the missing parts I would need to make these fully usable on a tank and prices?

 

[RedReefer]

Send Roger a PM. He will be in touch with parts info. His info = @rvitko

 

[RedReefer]

I have two used 6125 powerheads that came on some sea sweeps I bought. I have swapped out the 6125s for the smaller 6025s because I ended up going with a smaller tank than planned.

I want to sell the 6125s but they only have the silencer clamp, no silicone buffers or magnets because they were attached to the sea sweeps.
Do you know the part numbers of the missing parts I would need to make these fully usable on a tank and prices?

I would 1st try to contact the person where you purchased. See if they have the missing parts? 2nd PM Roger.

 

[Breadman03]

This should be the main link. I'd get part numbers, then comparison shop a bit.

6065.620 should be the little buffers and 6105.515 for the magnets.

This is the link to my search for "6125", but I don't know if it'll do something goofy.

 

[goody]

I would 1st try to contact the person where you purchased. See if they have the missing parts? 2nd PM Roger.

Got them locally and unfortunately he only had parts that were on the sea sweeps.

Maybe others would purchase without the magnets or they might be able use these larger powerheads with 6205 or 6095 parts?