9 watt pump using 17 watts

  • Thread starter Thread starter purpfish
  • Start date Start date
  • Tagged users Tagged users None

purpfish

Well-Known Member
View Badges
Joined
Aug 20, 2024
Messages
676
Reaction score
579
Location
idaho
What state or country do you live in
Idaho
Rating - 0%
0   0   0
My aquatrance 1000 skimmer pump is only rated for 9 watts but according to my eb832 it’s using 17 watts is this harmful to the tank, and is the pump broken?
 
How long has the pump been running?

Are there any obstructions to the output?

Is the impeller fractured?

Any Ca buildup in the pump?
 
My aquatrance 1000 skimmer pump is only rated for 9 watts but according to my eb832 it’s using 17 watts is this harmful to the tank, and is the pump broken?
What the eb total volts and and pump amps showing. Would not put to much stress on a low watt device reading The voltages meter on the ob823 or not the most accurate and the amps round to the nearest tenth. A 1/10 Change in amp reading will change your wattages numbers +-12 watts assuming your voltage is at 120v
 
How long has the pump been running?

Are there any obstructions to the output?

Is the impeller fractured?

Any Ca buildup in the pump?
Brand new pump in a external skimmer
IMG_2190.jpeg
 
Emailed reef octo hope I can get a replacement but I’m mainly worried about this being harmful to my tank ?
 
It won’t leach anything weird because of the extra watts?
Not for a long time....however, you should return as overwattage is a sign of a bad pump, (or something causing a restriction, or too big of a head for the pump).
 
Not for a long time....however, you should return as overwattage is a sign of a bad pump, (or something causing a restriction, or too big of a head for the pump).
As mentioned earlier this is a brand new skimmer pump so not sure
 
I had a brand new Sicce that was overheating.....exchanged for new........however, you do you.
 
I had a brand new Sicce that was overheating.....exchanged for new........however, you do you.
I’m trying to get reef octopus to send me a new pump I was worried about it and that’s why I started this thread
 
Temp is raising so might just have to take it off now, so irritating
 
are you running external or in sump? externals usually raise only by 2~3 degrees regardless if broken or not....anything above that would be concerning....
 
so the pump is 100% percent safe to leave in before I get a new one?
 

How sensitive/accurate is the device measuring this? Watts = Volts * Amps, so maybe the amps are being rounded up here. Also are these the numbers you see after running for a while or just on startup?
 

WHAT DO YOU ALWAYS RUN OUT OF AT THE WORST TIME?

  • Salt mix

    Votes: 14 17.9%
  • Fish or coral food

    Votes: 4 5.1%
  • Test kits or reagents

    Votes: 8 10.3%
  • Filter media or replacement fleece

    Votes: 4 5.1%
  • RO/DI filters or supplies

    Votes: 13 16.7%
  • Fragging and repair supplies, like glue or epoxy

    Votes: 8 10.3%
  • I keep a backup of everything

    Votes: 21 26.9%
  • Other (Post in the comments)

    Votes: 6 7.7%

New Posts

Back
Top
Home
Post thread…
Market
What's new