90’ kessil control and link cable

[Reefinmike]

all, i’m doing some fine tuning on my tank setup. My canopy hides my kessils well but you can see the vdm control cable and aux cable i have linking them. As far as I know, it just uses a standard 1/8” male stereo connection. Would this 90’ adapter work? If not, could I clip off the stereo end and wire in a 90’ end without messing up the signal?

Edit: realized the original cord i posted was 1/4” not 1/8”.

 

[Jason mack]

@Brew12 might be able too help !

 

[Brew12]

all, i’m doing some fine tuning on my tank setup. My canopy hides my kessils well but you can see the vdm control cable and aux cable i have linking them. As far as I know, it just uses a standard 1/8” male stereo connection. Would this 90’ adapter work? If not, could I clip off the stereo end and wire in a 90’ end without messing up the signal?

Edit: realized the original cord i posted was 1/4” not 1/8”.

Honestly, I have no idea if it would work, but I don't have any reason to think it would with a 1/4" 90 degree adapter. I feel it is more likely to work than not. The manufacturers tend to use as many off the shelf parts as possible.