Adding another tank to my Apex

  • Thread starter Thread starter rogerrgr
  • Start date Start date
  • Tagged users Tagged users None

rogerrgr

Active Member
View Badges
Joined
Nov 1, 2010
Messages
206
Reaction score
59
Location
Barberton, Ohio
Rating - 0%
0   0   0
I have the Apex controller on my reef tank in the living room. I have an older Ac Junior and EB8 on my seahorse tank.
My question is what is my best option to be able to control the seahorse tank with an Apex. I would like to monitor temp and Ph and be able to switch on and off outlets with Fusion like I can on my reef tank.
Can I just link it to my reef tank Apex and get another module or would I have to get a separate Apex Jr or something? Thanks!
 
You need a long bus cable, and a PM1 module to link another EB 8 to the current Apex. You can hook a PH probe and a temp probe to the pm1 module
 
What's the distance between the two?
It's about 30' or so apart and would have to run it down through the basement.
You need a long bus cable, and a PM1 module to link another EB 8 to the current Apex. You can hook a PH probe and a temp probe to the pm1 module
And then I could hook my current DC8 from my ac jr to the PM1 module? Thanks!
Depending on the distance between the two tanks, you can find a suitable Aquabus cable to connect an EB8 or EB4 and a PM1 module.

I don't know if I'm allowed to post links, but make sure you buy the APEX cable.
http://www.usbfirewire.com/Parts/rr-apex-xxg.html
Thanks! Are the aquabus cables different than a USB cable?
 
There is no difference between USB cables and Aquabus cables. The cables are the same. Only the voltage and signals carried are different. Any cable with the proper connectors may be used with the Apex as long as it is just a cable and does not have repeaters in it (as some long USB cables have).
 
There is no difference between USB cables and Aquabus cables. The cables are the same. Only the voltage and signals carried are different. Any cable with the proper connectors may be used with the Apex as long as it is just a cable and does not have repeaters in it (as some long USB cables have).
Thank you!
 
There is no difference between USB cables and Aquabus cables. The cables are the same. Only the voltage and signals carried are different. Any cable with the proper connectors may be used with the Apex as long as it is just a cable and does not have repeaters in it (as some long USB cables have).


Some long USB Cables have repeaters in them, You do not want any repeaters.
 

TOP 10 Trending Threads

WHICH AREA OF REEFKEEPING MOST NEEDS A GENUINE BREAKTHROUGH?

  • Lighting

    Votes: 1 2.8%
  • Pumps and water flow

    Votes: 1 2.8%
  • Water testing and monitoring

    Votes: 12 33.3%
  • Controllers, apps, and device compatibility

    Votes: 5 13.9%
  • Filtration and nutrient export

    Votes: 1 2.8%
  • Automatic feeding

    Votes: 4 11.1%
  • Leak prevention and tank safety

    Votes: 5 13.9%
  • Equipment reliability and repairability

    Votes: 4 11.1%
  • Other (leave a comment in the thread)

    Votes: 3 8.3%
Back
Top
Home
Post thread…
Market
What's new