Adding sump on a AIO tank

  • Thread starter Thread starter LetItReef
  • Start date Start date
  • Tagged users Tagged users None

LetItReef

2500 Club Member
View Badges
Joined
May 29, 2014
Messages
2,921
Reaction score
1,434
Location
San Diego, CA
What state or country do you live in
California
Rating - 0%
0   0   0
Hello,

I am thinking of adding a sump on my 20g for more volume but would like to hear some input.

I’m not drilling the tank, I will use a Life reef hob overflow . Here ‘s my question, can I leave the existing pump on the chamber of the AIO or I have to put a new pump below along with sump?

Thanks in advance.
 
You will more than likely have to get a new pump as the stock pump may not be able to overcome the head pressure and circulate the water. When I added a sump to my BioCube 32 the stock pump could not push the water up to the display from the sump. I upgraded to a Sicce 1.5 and it does a good job and is very quiet.
 
You will more than likely have to get a new pump as the stock pump may not be able to overcome the head pressure and circulate the water. When I added a sump to my BioCube 32 the stock pump could not push the water up to the display from the sump. I upgraded to a Sicce 1.5 and it does a good job and is very quiet.

I have the Mighy jet pump w/c is rated at 326 gph.
My question is, can I “leave” this pump on the AIO chamber?
 
Ahh. My bad. Unfortunately that's a little outside my experience.
 
Ahh. My bad. Unfortunately that's a little outside my experience.
All good :). Did u drill your Biocube, if not what hob overflow do u have? Thanks!

If I have no choice , pump will go below at the sump.
 
No drilling. I used the Eshopps AEO10100 Overflow Nano Box. I did have to make a few cuts to the hood to make it fit with the hood. I wanted to keep the hood because I have young children who I didn’t want to put stuff in the tank.

C30686F9-EA89-4E33-81FD-D151B3974357.jpeg F474EA29-AEF7-4FE7-A64F-898F3D09CDE0.jpeg C8B47DBC-B6E2-4E36-A9C2-1B08C35D664D.jpeg
 
No drilling. I used the Eshopps AEO10100 Overflow Nano Box. I did have to make a few cuts to the hood to make it fit with the hood. I wanted to keep the hood because I have young children who I didn’t want to put stuff in the tank.

C30686F9-EA89-4E33-81FD-D151B3974357.jpeg F474EA29-AEF7-4FE7-A64F-898F3D09CDE0.jpeg C8B47DBC-B6E2-4E36-A9C2-1B08C35D664D.jpeg

Came out good! I Where’s return pipe and how’s Eshopps overflow, no issues?
 
The return pipe is in the third picture. I still need to clean up the wires. It’s a work in progress. I have had the Eshopps overflow on it for about a year and it has not messed up once.
 
HOB overflows are notorious for running into issues that can potentially cause flooding. Looks good but get some leak sensors or something just in case.
 
HOB overflows are notorious for running into issues that can potentially cause flooding. Looks good but get some leak sensors or something just in case.
I will definitely look into that.
 
I have the Mighy jet pump w/c is rated at 326 gph.
My question is, can I “leave” this pump on the AIO chamber?

Hi LetItReef, Did you leave the stock pump in the back chamber of the cube after running your return line? Essentially pumping from sump into back chamber and having the biocube run in parallel to the sump. I am considering this on my current build.
 

TOP 10 Trending Threads

WHAT DO YOU ALWAYS RUN OUT OF AT THE WORST TIME?

  • Salt mix

    Votes: 17 18.7%
  • Fish or coral food

    Votes: 5 5.5%
  • Test kits or reagents

    Votes: 9 9.9%
  • Filter media or replacement fleece

    Votes: 5 5.5%
  • RO/DI filters or supplies

    Votes: 14 15.4%
  • Fragging and repair supplies, like glue or epoxy

    Votes: 10 11.0%
  • I keep a backup of everything

    Votes: 24 26.4%
  • Other (Post in the comments)

    Votes: 7 7.7%
Back
Top
Home
Post thread…
Market
What's new