ADVICE NEEDED: What do do with this space in sump?

[d2mini]

I've always had a refugium. Love the big balls of cheato! But now with this small Cade 600 I don't have the room, at least for what I've normally done.
This circled area in my sump is meant for filtration media like siporax, bio-spheres, etc.
The dims of this area is about 4" x 14" and water level is 9".
What can I do here for algae control?
Some kind of long skinny refugium light?
Turf scrubber?
I'm afraid of not having control over light spill and growing algae in other parts of the sump.
Appreciate any thoughts here, as well as links to any specific items you might suggest, and then I can make a decision on what to do.

TIA!

 

[Reef Wizard]

I would look into:
A) An algae scrubber
B) UV sterilizer Maybe something like this
C) Skinny Fuge light I'm looking at this one for my build


Not familiar with your setup, but
The UV could help with algae control under the right flow rate may need a smaller pump as well unsure though.
I have never used a scrubber but could be useful in your situation they have light blockers.
You could angle the Refugium light toward the wall instead of toward the skimmer. The one I linked is magnetic so it wont force a certain angle and is streamlined.

 

[d2mini]

I would look into:
A) An algae scrubber
B) UV sterilizer Maybe something like this
C) Skinny Fuge light I'm looking at this one for my build


Not familiar with your setup, but
The UV could help with algae control under the right flow rate may need a smaller pump as well unsure though.
I have never used a scrubber but could be useful in your situation they have light blockers.
You could angle the Refugium light toward the wall instead of toward the skimmer. The one I linked is magnetic so it wont force a certain angle and is streamlined.

THanks!
I actually have that Tunze light in my cart and probably going with that.
Scrubber would probably get the job done but in a more utilitarian way. I would enjoy the fuge more. :)

 

[LBCBJ]

Have you considered a Pax Bellum? Have consistently heard good things about them, and would be super tidy solution. Can plumb it right into your manifold, no light spill, messy chaeto sloshing around, etc.

25% off on BRS: https://www.bulkreefsupply.com/a-r-i-d-n18-macroalgae-reactor-pax-bellum.html

 

[Mschmidt]

@Projects with Sam makes this scrubber that may fit.
https://parlaquatics.com/collections/algae-scrubbers

 

[d2mini]

Have you considered a Pax Bellum? Have consistently heard good things about them, and would be super tidy solution. Can plumb it right into your manifold, no light spill, messy chaeto sloshing around, etc.

25% off on BRS: https://www.bulkreefsupply.com/a-r-i-d-n18-macroalgae-reactor-pax-bellum.html

Yeah, those look cool!!!
More than I wanted to spend though, and honestly probably overkill for what I need for this tank.

@Projects with Sam makes this scrubber that may fit.
https://parlaquatics.com/collections/algae-scrubbers

Cool option, I was not familiar with those.

 

[Mschmidt]

Cool option, I was not familiar with those.

If you message him he will probably make them un out of stock

 

[jason2459]

If you're open to an ATS I'm pretty impressed with WSR found on eBay
https://www.ebay.com/sch/i.html?_dk...ecall_filtering&_ssn=opha6987-xijafayf&_oac=1
Can see my experience with it in my tank thread link. And of course I'm always going to be a huge fan of the Turbo's Aquatics but will be a bit before those are fully ready to go again.

You can mount over that area and still have a fuge.

 

[d2mini]

Thanks, all!

I ended up ordering the Tunze light for $77 shipped with the BF sales going on.
It's the perfect size for the space I have so we'll see how it goes. If it doesn't work out, it's not a big investment and then I'll probably try out one of the scrubbers.

 

[Adamc13o3]

How do you like that skimmer?

 

[d2mini]

How do you like that skimmer?

I've had it just several weeks and I freakin love it.
Skims way better than the Bubble Magus Curve 7 I had in there before. The adjustment knob is crazy fine. And the cup is so easy to remove/replace. Also cool that the neck inside the cup pops out for extra cleaning. Oh and it's got an amazing build, all milled pvc. Top notch.

 

[Adamc13o3]

I have been running it for 3 weeks now as well. Same experience. My tank is fairly new though so not too much to skim, plus I’m running a roller mat. Was curious what others thought.

Thanks,

Adam

 

[Science/G]

Denitrification chamber with Brightwell Blocks? Once it gets going just be careful your nitrates don't bottom out

 

[d2mini]

Denitrification chamber with Brightwell Blocks? Once it gets going just be careful your nitrates don't bottom out

Yeah, i had Marine Pure spheres in there from the start and had rising aluminum levels on my ICP tests. Removed them and levels came down.

I've had No3 and P04 super high on this tank and I've had them super low/non-existent. Still trying to balance it out. but typically if I don't dose, they bottom out.
I'm hoping that having some macros in there will help smooth things out a bit if levels start to get too high.

 

[jda]

I am a multiple skimmer guy, but that looks too small. Maybe semi-remote DSB?

 

[Kayvon]

I've got a cryptic zone in mine. Just get a bunch of rubble rocks and a seed rock.

 

[Science/G]

Yeah, i had Marine Pure spheres in there from the start and had rising aluminum levels on my ICP tests. Removed them and levels came down.

I've had No3 and P04 super high on this tank and I've had them super low/non-existent. Still trying to balance it out. but typically if I don't dose, they bottom out.
I'm hoping that having some macros in there will help smooth things out a bit if levels start to get too high.

Maybe some black acrylic to block the light from spilling out of that area. I'm with you on the problem of the whole entire sump area starting to grow algae.

 

[d2mini]

Maybe some black acrylic to block the light from spilling out of that area. I'm with you on the problem of the whole entire sump area starting to grow algae.

Yep, exactly what I was thinking of doing.