Ai prime 16 scheduling question

bokhesh

New Member
View Badges
Joined
Nov 10, 2024
Messages
19
Reaction score
9
Location
Toronto
What state or country do you live in
Canada
Rating - 0%
0   0   0
Hello guys,
I recently got the ai prime 16hd and am currently using the saxby scheduling. I run a 30gallon tank 36x12x12. How much should I lower the intensity to make sure its good for corals when I add them. Also is intensity the amount of watts being used?
 
Hello guys,
I recently got the ai prime 16hd and am currently using the saxby scheduling. I run a 30gallon tank 36x12x12. How much should I lower the intensity to make sure its good for corals when I add them. Also is intensity the amount of watts being used?
Why would you lower the intensity?


IMG_8623.jpeg
IMG_8624.jpeg


You don’t need acclimation mode or to lower the intensity of the lights when adding corals. That’s reserved for when you change from one light to another.


On the other thing about power usage this is all I got. Notice at the top of the screen shot it says 35W
1731737283604.png
 
I have AI Prime on a 15 gallon softie tank (mushrooms and zoa's) 12" depth set at 70%. You have the same depth, so I would set it at 75%-80% and see how it goes.

The problem is that the light advertises a 24" width capability (at 100%), but in reality its more like 16"-18". So your 36" length will be a challenge, see how it goes but you might want to consider a second one for the length.
 
Last edited:
Why would you lower the intensity?


IMG_8623.jpeg
IMG_8624.jpeg


You don’t need acclimation mode or to lower the intensity of the lights when adding corals. That’s reserved for when you change from one light to another.


On the other thing about power usage this is all I got. Notice at the top of the screen shot it says 35W
1731737283604.png
Ohh ok I thought I had to lower the intensity a little since the saxby is made for a huge tank so I had no idea if its suitable for a smaller one. Thank you for the screenshots I get the usage part now thanks!!
 
I have AI Prime on a 15 gallon softie tank (mushrooms and zoa's) 12" depth set at 70%. You have the same depth, so I would set it at 75%-80% and see how it goes.

The problem is that the light advertises a 24" width capability (at 100%), but in reality its more like 16"-18". So your 36" length will be a challenge, see how it goes but you might want to consider a second one for the length.
yes I have 2 lights set up on it sorry I forgot to mention. Ok thank you so much I will do as u said and see how it goes!!
 

TOP 10 Trending Threads

WHEN NUISANCE ALGAE OR CYANO FIRST APPEARS, WHAT DO YOU DO FIRST?

  • Manually remove it and observe

    Votes: 9 22.0%
  • Retest nutrients and other parameters

    Votes: 9 22.0%
  • Adjust flow or lighting

    Votes: 1 2.4%
  • Reduce or change feeding

    Votes: 0 0.0%
  • Add or strengthen the cleanup crew

    Votes: 6 14.6%
  • Improve filtration or nutrient export

    Votes: 2 4.9%
  • Use a targeted treatment

    Votes: 0 0.0%
  • Wait and let the tank find its balance

    Votes: 11 26.8%
  • Phone a friend...

    Votes: 0 0.0%
  • It depends (explain in the comments)

    Votes: 3 7.3%
Back
Top
Home
Post thread…
Market
What's new