AIO Tank Manifold??

[JoshO]

Had anyone made a manifold for an All In One system?
I'm running a red sea max nano currently and am strongly considering attempting to add a manifold so I can run a chaeto reactor and a UV Steriliser in the cabinet.
Do you guys have any examples or ideas on how this could work??
And no upgrading is not an option right now ;Dead

 

[DC Reefer]

I would probably go with another pump to feed the two devices and then have it return back into one of the AIO chambers. Another option would be HOB for 1 or both the devices you want to add. If using a single pump I would probably go to the UV then the algae reactor. If you implement a solution would be good to see some pics.

 

[JoshO]

I would probably go with another pump to feed the two devices and then have it return back into one of the AIO chambers. Another option would be HOB for 1 or both the devices you want to add. If using a single pump I would probably go to the UV then the algae reactor. If you implement a solution would be good to see some pics.

I'm using one pump as a normal return for my filtration and then going to run a secondary dry pump to supply the external items. Trying to work how to use this on a hard manifold

 

[DC Reefer]

I'm using one pump as a normal return for my filtration and then going to run a secondary dry pump to supply the external items. Trying to work how to use this on a hard manifold

When you say dry pump, is this an external (i.e. not a submerged pump)? If so, I would try and find a self-priming pump, but I don't have one to recommend. Without self priming could be a pain. Could you put a second submerged pump in the current return chamber?

 

[JoshO]

When you say dry pump, is this an external (i.e. not a submerged pump)? If so, I would try and find a self-priming pump, but I don't have one to recommend. Without self priming could be a pain. Could you put a second submerged pump in the current return chamber?

It's not self priming but once the system is wet it should stay primed, even with the pump isolated due to the location of shut offs

 

[Hughesy]

It's not self priming but once the system is wet it should stay primed, even with the pump isolated due to the location of shut offs

Did you implement this? How's it going? Thinking of doing the same thing on a new max nano and would love to learn from your experience. Many thanks