AliExpress PH and ORP probes

HighlandReef

Chalice Monger
View Badges
Joined
Nov 18, 2009
Messages
318
Reaction score
95
Location
NW Indiana
Rating - 0%
0   0   0
Has anyone tried the PH or ORP probes from AliEpress?
I am seeing most of the PH probes are in the $5 - $10 range, and the ORP probes are in the $15 range. Much cheaper than the normal probes we have been buying.
I am ordering the conductivity probe to monitor salinity (requires rewiring) and might try one of the orp probes as well.
 
Has anyone tried the PH or ORP probes from AliEpress?
I am seeing most of the PH probes are in the $5 - $10 range, and the ORP probes are in the $15 range. Much cheaper than the normal probes we have been buying.
I am ordering the conductivity probe to monitor salinity (requires rewiring) and might try one of the orp probes as well.
Following along as I’d like to know how well they work.
 
Can you share the "re-wiring" ? I am trying to figure this out also .. BNC to 4 pin mini-DIN .. which pins does the probe connect to ?
 
Can you share the "re-wiring" ? I am trying to figure this out also .. BNC to 4 pin mini-DIN .. which pins does the probe connect to ?
Here is a screen shot from the other thread.
 

Attachments

  • IMG_7873.png
    IMG_7873.png
    206.4 KB · Views: 161
is there a link to the other thread?
There is but don’t get your hopes up, lol!
I am already having issues with the AliExpress salinity probe and it doesn’t look like the vendor is very interested in doing anything about it.
 
I have tried the cheap ones and they we not worth the savings for me as I needed to replace them sooner as they started to drift badly. I like Pinpoint and Apera probes
 
I have tried the cheap ones and they we not worth the savings for me as I needed to replace them sooner as they started to drift badly. I like Pinpoint and Apera probes
I had similar experience with AliExpress salinity probe.
I’ll have to give the Apera probes a try, Thanks!
 
Has anyone tried the PH or ORP probes from AliEpress?
I am seeing most of the PH probes are in the $5 - $10 range, and the ORP probes are in the $15 range. Much cheaper than the normal probes we have been buying.
I am ordering the conductivity probe to monitor salinity (requires rewiring) and might try one of the orp probes as well.
You get what you pay for.

I'd have zero confidence in a cheap probe.

Even $100 probes can be problematic. It's not until you get to $1000 probes you get accurate and repeatable results.

Perhaps cheap is all you need, but I wouldn't automate anything based on their output.
 
I have tried the cheap ones and they we not worth the savings for me as I needed to replace them sooner as they started to drift badly. I like Pinpoint and Apera probes
Pinpoint is what I use for orp & ph also. Just replace them every few years, or when they won't calibrate anymore.
 
You get what you pay for.

I'd have zero confidence in a cheap probe.

Even $100 probes can be problematic. It's not until you get to $1000 probes you get accurate and repeatable results.

Perhaps cheap is all you need, but I wouldn't automate anything based on their output.
This. I can't even with an aliexpress probe. Hard NO thanks.
 

WHICH PART OF YOUR SETUP IS HARDEST TO REACH OR REMOVE FOR ROUTINE MAINTENANCE?

  • Glass behind or beside the tank

    Votes: 8 23.5%
  • Powerheads or wavemakers

    Votes: 3 8.8%
  • Sump or rear filtration chambers

    Votes: 5 14.7%
  • Skimmer or other filtration equipment

    Votes: 2 5.9%
  • Overflow or plumbing

    Votes: 7 20.6%
  • Lights or lids

    Votes: 0 0.0%
  • Mine is pretty easy to access!

    Votes: 8 23.5%
  • Other—tell us what I missed

    Votes: 1 2.9%
Back
Top
Home
Post thread…
Market
What's new