Hi,
So is there an ETA for the PH probe to be debugged?1) As long as the ph probe stays clean without any algae, the kh reading won't get affected. Black edition! Great idea.
2) ph reading is a new feature that was just added and needs to be fixed. At this point it is only useful for watching trends.
3) I have made a video on how to setup the calcium reactor controller: please see below. Cheers!
CRA Setup with calcium reactor
The pH feature introduced in the fourth generation was mainly designed around the concept and indicator of relative pH value.The absolute pH value is merely provided as a reference or supplementary reading. In the future, it may be removed, and only the relative pH indicator will be kept, allowing users to manage and control pH levels more conveniently.
No you don’t need to bother with the reference water the only thing you need to do to calibrate is test with whatever alk tester you trust most and enter the results into the calibration and you are done.
So... Do you ever run site sales?
So... Do you ever run site sales?
Definitely understandable. Have to be thoughtful about impacts. May we live in interesting times.
Ok in case anyone else has this happen after the first reading the PH probe health went to 100% and everything is working as expected.
Yes had that issue - the connection on both the units I had was very unreliable, slight bump or moved cable and the probe will drop to 0.
it takes one hour for the new machine data to establish and show on the server. So this is normal.
I will make a video on the dosing soon. The alk solution needs to be stored in a bottle and connected to the first dosing head to the left of the unit:
