Aluminum Removal?

Lazys Coral House

Well-Known Member
View Badges
Joined
Sep 14, 2008
Messages
925
Reaction score
590
Location
Dayton, Ohio
Rating - 0%
0   0   0
Hi all, I have a decent size aquaculture business with lots of frags. I use ceramic plugs, and as a result the system has quite a bit of Aluminum in it. Large water changes are not able to keep up with it and when it gets to high I have had STN events with acros and my leathers close up. After a large 75% water change it takes a good week or two for them to open up back up. I am not 100% sure this is from Aluminum but I would like to eliminate this as a potential cause. Does anyone know if there is some type of media available that absorbs aluminum?
 
Only zeolite can be used to adsorbs metals by mechanical filtration
Other way algae
 
after the cleaning, why not use plugs made from a different material? it looks the plugs might be hurting your business and they are a very small part of the cost per frag.
 
Poly filter (coarse foam media) media supposedly removes metals, that could also be an option? How much al do you have?

I don't think it is successful with aluminum from seawater.
 
I certainly haven't had any success in picking up Al from seawater with a polyfilter. At least not the form it was in.


If its desired to lower Al I'd suggest removing the source and water changes with lower Al content then the water it's replacing.
 
Last edited:
Also, just remembered the Triton folks, at least the owner, believes GFO removes some Al or at least he stated this at one time in the past. I don't know if it's true or if their stance has changed or not.
 
I have read Eshan (triton) state that using GFO will remove the Al and using Al phos media will remove the Iron accumilation from GFO so should be alternated between changes when running for phosphate removal
 
I have read Eshan (triton) state that using GFO will remove the Al and using Al phos media will remove the Iron accumilation from GFO so should be alternated between changes when running for phosphate removal

Which is odd to me. From what I understand the Triton method promotes a thick multi variety macro algae diverse section in the sump or refugium. Iron would be desirable. I would think they would promote GFO only and potentially iron dosing. I see no benficial need for Al. And I'm not sure GFO can even remove Al effectively or at all. I know Randy has commented on this before but can't remember the answer given right now.
 
Which is odd to me. From what I understand the Triton method promotes a thick multi variety macro algae diverse section in the sump or refugium. Iron would be desirable. I would think they would promote GFO only and potentially iron dosing. I see no benficial need for Al. And I'm not sure GFO can even remove Al effectively or at all. I know Randy has commented on this before but can't remember the answer given right now.

I don't recall exactly either, but it wasn't enough to convince me to recommend the two media approach where they recommend alternative GFO and aluminum oxide..
 
Which is odd to me. From what I understand the Triton method promotes a thick multi variety macro algae diverse section in the sump or refugium. Iron would be desirable. I would think they would promote GFO only and potentially iron dosing. I see no benficial need for Al. And I'm not sure GFO can even remove Al effectively or at all. I know Randy has commented on this before but can't remember the answer given right now.

It's probably because they want you to buy iron supplements from them...using only GFO would negate the need.. Not a cynic at all..
 
Hi all, I have a decent size aquaculture business with lots of frags. I use ceramic plugs, and as a result the system has quite a bit of Aluminum in it. Large water changes are not able to keep up with it and when it gets to high I have had STN events with acros and my leathers close up. After a large 75% water change it takes a good week or two for them to open up back up. I am not 100% sure this is from Aluminum but I would like to eliminate this as a potential cause. Does anyone know if there is some type of media available that absorbs aluminum?
I have cultured thalassiosira weissflogii to use in a mixed blend with phytoplankton to remove heavy metals ( with aluminium) from my reef tank.
 

TOP 10 Trending Threads

HOW DO YOU HANDLE HOLIDAY DECORATING AROUND YOUR REEF?

  • I decorate the tank or stand

    Votes: 1 20.0%
  • I decorate AROUND the tank or stand

    Votes: 1 20.0%
  • I add one small seasonal touch but keep it very basic

    Votes: 0 0.0%
  • I take a holiday photo, but don’t decorate the space

    Votes: 0 0.0%
  • I leave the reef area as it is

    Votes: 3 60.0%
  • We don’t decorate for the holidays

    Votes: 0 0.0%
  • Other (Post in the comments)

    Votes: 0 0.0%
Back
Top
Home
Post thread…
Market
What's new