Ammonia High!!

paxton.rock

Active Member
View Badges
Joined
Mar 2, 2023
Messages
162
Reaction score
71
Location
abilene
What state or country do you live in
Texas
Rating - 0%
0   0   0
I am quarantining my fish and treating for ich. I put brand new water in last night when I moved them to quarantine. my ammonia levels are already 1ppm in just 24 hours. Am I seriously going to have to do a water change every single day? Or is there a better alternative? bottled bacteria price would add up very quickly. And clearly I do not have time to cycle it. any recommendations?
 
Correct me if I’m wrong. I heard prime was not good because it only makes it “safe” and doesn’t remove it.
Prime is an alternative and not solution- it locks it up temporarily and does not remove ammonia but neutralizes chlorine and chloramines. Water changes reduce Ammonia and best is to do a 20-25% water change then 2 gallons daily for 7-10 days but first confirm you’re not getting false readings. Take a water sample to an LFS that does Not use API test kits and see what readings they come up with and to compare with yours.
 
Prime is an alternative and not solution- it locks it up temporarily and does not remove ammonia but neutralizes chlorine and chloramines. Water changes reduce Ammonia and best is to do a 20-25% water change then 2 gallons daily for 7-10 days but first confirm you’re not getting false readings. Take a water sample to an LFS that does Not use API test kits and see what readings they come up with and to compare with yours.
I hear a lot of people highly recommending using the seachem ammonia alert badge? Opinion?
 
I hear a lot of people highly recommending using the seachem ammonia alert badge? Opinion?
I trust a politician more than I trust these badges. They also work in freshwater. The first two weeks they may provide good reference but remaining in water with treatments, bio loads and water changes….. like an ammonia strip that must be removed and tested for 60 seconds, how accurate can they be?
My trust is in quality kits such as Hanna, salifert and even nyos
 
I am quarantining my fish and treating for ich. I put brand new water in last night when I moved them to quarantine. my ammonia levels are already 1ppm in just 24 hours. Am I seriously going to have to do a water change every single day? Or is there a better alternative? bottled bacteria price would add up very quickly. And clearly I do not have time to cycle it. any recommendations?

Yes, you will have to change water each time the ammonia shows above 0.5 Total Ammonia.

You can take some bio media from your cycled DT and put it into the filter you're running on your QT.
It should catch up in couple of days by which time you can slow down the water changes.
 
I trust a politician more than I trust these badges. They also work in freshwater. The first two weeks they may provide good reference but remaining in water with treatments, bio loads and water changes….. like an ammonia strip that must be removed and tested for 60 seconds, how accurate can they be?
My trust is in quality kits such as Hanna, salifert and even nyos
i read on another thread that copper dosing false reads liquid ammonia test. but you are saying i will be fine with a salifert ammonia test?
 
i read on another thread that copper dosing false reads liquid ammonia test. but you are saying i will be fine with a salifert ammonia test?
Copper can change characteristic but not substantial
 
Copper can change characteristic but not substantial
in your opinion, is salifert ammonia test with copper dosing going to be innacurate to the extent of fish dying? or am i going to be pretty safe?
 
in your opinion, is salifert ammonia test with copper dosing going to be innacurate to the extent of fish dying? or am i going to be pretty safe?
You want to monitor both copper and ammonia. Once ammonia climb’s above.025…. Measure copper. If coppersafe is let’s say 2.48. Do water change and Mix new water at 2.49 and you’re good
Just have to do this 4 weeks
 
You want to monitor both copper and ammonia. Once ammonia climb’s above.025…. Measure copper. If coppersafe is let’s say 2.48. Do water change and Mix new water at 2.49 and you’re good
Just have to do this 4 weeks
I’m confused, I just want verification that I wont be screwed is I use generic Salifert ammonia test or if I need to blow money on a hanna checker.
 
I am quarantining my fish and treating for ich. I put brand new water in last night when I moved them to quarantine. my ammonia levels are already 1ppm in just 24 hours. Am I seriously going to have to do a water change every single day? Or is there a better alternative? bottled bacteria price would add up very quickly. And clearly I do not have time to cycle it. any recommendations?

First, what is your ich treatment?" If you are using cupramine (and possibly other copper treatments) you can't use Prime as it releases free copper.

Coppersafe and Copper Power add about 0.50 ppm ammonia when you dose it, but it is not impossible for a new tank with a good fish load in it to build up 1 ppm of ammonia per day.

What is the pH of the tank? Ammonia is much more toxic at high pH than at low.

Do you have any established bio media you can move over from your DT? Filter floss, non-carbonate rock, etc.?
If not, your next best option is bacteria in a bottle, like Dr. Tims, but as you said, that will get pricey.

Jay
 

TOP 10 Trending Threads

WHAT DO YOU ALWAYS RUN OUT OF AT THE WORST TIME?

  • Salt mix

    Votes: 17 18.1%
  • Fish or coral food

    Votes: 5 5.3%
  • Test kits or reagents

    Votes: 10 10.6%
  • Filter media or replacement fleece

    Votes: 5 5.3%
  • RO/DI filters or supplies

    Votes: 15 16.0%
  • Fragging and repair supplies, like glue or epoxy

    Votes: 11 11.7%
  • I keep a backup of everything

    Votes: 24 25.5%
  • Other (Post in the comments)

    Votes: 7 7.4%
Back
Top
Home
Post thread…
Market
What's new