Apex auto feeder

[jimbosreef]

so i have set it to auto, i have verified that it will run if manually clicking the feed cycle. i have watched countless videos on the programming and making sure i have mine set like all those videos. i have also verified that my programming is similar to those provided here, and it is still not running automatically like it should be.

**edit**
i have since deleted the module and readded. i will see if that fixes the issue

 

[areefer01]

It looks like you have log enabled. Have you pulled up the output log in Fusion to see if it reported running there? I am trying to remember if you have the log button enabled that is where it notes it or not. I do not have mine set so can't verify.

With regards to the time Suncrestreef also has a article on the clock functionality. It has been a good while since I set mine up. Not sure if there is anything here you haven't seen.

https://forum.neptunesystems.com/sh...ead-This-Thread!&p=96567&viewfull=1#post96567

 

[jimbosreef]

It looks like you have log enabled. Have you pulled up the output log in Fusion to see if it reported running there? I am trying to remember if you have the log button enabled that is where it notes it or not. I do not have mine set so can't verify.

With regards to the time Suncrestreef also has a article on the clock functionality. It has been a good while since I set mine up. Not sure if there is anything here you haven't seen.

https://forum.neptunesystems.com/sh...ead-This-Thread!&p=96567&viewfull=1#post96567

this is the log ive got so far. the only time it runs is when i manually force it to