Apex Time spanning midnight

[psumms]

Am i correct in thinking that the Apex time command cannot span midnight, so the following would not be valid:
If Time 22:00 to 07:00 Then OFF
and instead you would need to use two separate lines, e.g.
If Time 22:00 to 23:59 Then OFF
If Time 00:00 to 07:00 Then OFF

Also, bonus question, does the OSC command always calculate a starting point from midnight?

 

[Mrtakeoff53]

Is it possible to reverse your command? Instead of IF 22:00 to 07:00 THEN OFF, try IF 07:00 to 22:00 then ON. It gets rid
Of your problem in a single line

 

[ca1ore]

You can span midnight. I do it with my ATS lights. OSC starts from midnight, yes.

 

[psumms]

Is it possible to reverse your command? Instead of IF 22:00 to 07:00 THEN OFF, try IF 07:00 to 22:00 then ON. It gets rid
Of your problem in a single line

Unfortunately not, there are several other commands that become difficult this way around.

 

[psumms]

Will test again. Something i've noticed which I think confused my initial test, my Apex system time is off at the moment. Seems Neptune have hard-coded daylight savings to those of US dates which leaves three weeks in March where my timers are off! Bizarre decision from a programming point of view!

 

[SuncrestReef]

Yes, If Time can span midnight:

Set OFF
If Time 18:00 to 08:00 Then ON

This is from my tutorial on Apex Timers: https://www.reef2reef.com/ams/neptune-apex-programming-tutorials-part-2-timers.689/