apex to tunze cable extension?

[drukkosz]

After some research I couldn't find an answer to my question so here I am.

My apex is in my basement and my tunze pump is upstairs in my main display. I have 2 Channel Apex to Tunze Stream Cable but its very short and wont reach the pump. Is there any kind of extension i can use in order to control the pump through my apex?

Does anybody know if this cable would work?:

Profilux Tunze Connection Cable - Type 2​

Profilux Tunze Connection Cable - Type 2

The Profilux Tunze2 Connection Cable allows for programming and control of Tunze powerheads through your Profilux Controller. The Tunze2 cable connects powerheads to the L2(L4) jack of the S-Port & L-Port Breakout box. Control through the Profilux opens up programming options for various...

www.bulkreefsupply.com

Thank you.

 

[blaxsun]

What does your current cable look like and where does it plug into your Apex?

 

[drukkosz]

What does your current cable look like and where does it plug into your Apex?

Hi,

this is the cable, not sure why they made it so short. It has 1 RJ45 connector which plugs into the Apex base unit

2 Channel Apex to Tunze Stream Cable - Neptune Systems

Connect your Apex Controller from Neptune to up to two Tunze Stream pumps. It has 1 RJ45 connector which plugs into the Apex base unit and 2 Din5 connectors which plug into 2 Tunze Controllable Stream pumps.

www.bulkreefsupply.com

 

[blaxsun]

It sounds like maybe all you need is a M-F RJ45 connection then?

 

[Lbrdsoxfan]

It sounds like maybe all you need is a M-F RJ45 connection then?

This or a 5 pin din male to female.

 

[drukkosz]

Thank you for your responses. Now I have a idea what to look for. I was wondering, is there a reason why not try the cable from profilux?

 

[Jamie814]

this is the cable, not sure why they made it so short. It has 1 RJ45 connector which plugs into the Apex base unit

Did you ever find a solution to this?

I am working on the same issue and wondering if a regular cat 6 extension cable with the Rj45 Male & Female ends will work to extend the cable.

 

[drukkosz]

Did you ever find a solution to this?

I am working on the same issue and wondering if a regular cat 6 extension cable with the Rj45 Male & Female ends will work to extend the cable.

unfortunately I have not. I had to mount my apex unit very high in order for it to reach it...

 

[Jamie814]

I'm going to try this cable and see if it works,
J&D Ethernet Extension Cable, Cat 6 Ethernet Extender Cable Adapter (6 Feet) Support Cat6 / Cat5e / Cat5 Standards, RJ45 Cords Shielded Male to Female

 

[drukkosz]

Please update the thread after the purchase :)