ATO sump levels

  • Thread starter Thread starter jdivz87
  • Start date Start date
  • Tagged users Tagged users None

jdivz87

Active Member
View Badges
Joined
Aug 21, 2022
Messages
409
Reaction score
149
Location
Worcester
What state or country do you live in
Massachusetts
Rating - 0%
0   0   0
Wassup guys! So I’m planning on starting my ATO with reservoir.
I watched a video and maybe I’m thinking too much into it but they mentioned that the reservoir has to sit lower than the sump so that there is no back siphon.
Im attaching the return pump in reservoir and obviously into the sump return section .

sump is on floor, I can’t go lower than that lol.

am I missing something?
 
As long as you have a siphon break installed in the correct spot you should be fine.

98B1EAB9-368C-4A8B-961D-C9A2CCDC7709.png
 
I'm not an expert so this is just how I have mine set up. My reservoir sits next to the sump. I have the tubing from the ATO pump in reservoir run up and over one of my return pipes so it is elevated, and then down into the return chamber of my sump, but above the water level so there is no chance what so ever of a back syphon.
 
I'm not an expert so this is just how I have mine set up. My reservoir sits next to the sump. I have the tubing from the ATO pump in reservoir run up and over one of my return pipes so it is elevated, and then down into the return chamber of my sump, but above the water level so there is no chance what so ever of a back syphon.
I'm not an expert so this is just how I have mine set up. My reservoir sits next to the sump. I have the tubing from the ATO pump in reservoir run up and over one of my return pipes so it is elevated, and then down into the return chamber of my sump, but above the water level so there is no chance what so ever of a back syphon.
Okay okay any pics?
 
As Kstatefan said "the output must be higher then the water level in the ATO reservoir". I use booster pumps for my ATO and AWC and was worried that the syphon breaks would leak or blow off so I went with the tube within a tube method which is 100% fool proof. Just ensure the water supply tube feeding the tube going to your sump is higher than the water level in your sump.
20221024_090612.jpg 20221024_090652.jpg 20221024_090659.jpg
 
Wassup guys! So I’m planning on starting my ATO with reservoir.
I watched a video and maybe I’m thinking too much into it but they mentioned that the reservoir has to sit lower than the sump so that there is no back siphon.
Im attaching the return pump in reservoir and obviously into the sump return section .

sump is on floor, I can’t go lower than that lol.

am I missing something?
Hi There I have just set up a new Red Sea Reefer G2. The ATO reservoir has to sit on top of the sump. Then feeds the sump through a ball valve. I have tested for power outage and nothing overflows when the pump is off. Not sure what else to beware of.
 
Okay I think I get it lol
Does you tank have an overflow? If so you can put you ATO output there just make sure it is above the water level. That would make it tank height and would have no chance of back siphon as long as the output is above water level in the overflow.
 
Hi There I have just set up a new Red Sea Reefer G2. The ATO reservoir has to sit on top of the sump. Then feeds the sump through a ball valve. I have tested for power outage and nothing overflows when the pump is off. Not sure what else to beware of.
Ball valve or float valve? If just a ball valve there is no reason it wouldn’t just immediately empty the ATO.
 
Okay I think I get it lol
I had the exact same question when I set mine up. I was pretty nervous about flooding my flood after reading some information and watching some videos.
As Kstatefan said "the output must be higher then the water level in the ATO reservoir". I use booster pumps for my ATO and AWC and was worried that the syphon breaks would leak or blow off so I went with the tube within a tube method which is 100% fool proof. Just ensure the water supply tube feeding the tube going to your sump is higher than the water level in your sump.
20221024_090612.jpg 20221024_090652.jpg 20221024_090659.jpg
This is how I have mine setup as well, the tube within a tube.
 
It’s pretty simple… keep your tubing or pipe or what ever you use to refill the sump above the water line! There’s zero chance of a siphon happening if there’s any air in the line.
 

TOP 10 Trending Threads

WHAT KIND OF REEFING DEAL ARE YOU HOPING TO PICK UP THIS BLACK FRIDAY?

  • A whole new aquarium or complete system

    Votes: 2 10.5%
  • Lighting, pumps, or other major equipment

    Votes: 2 10.5%
  • Controllers, testing, dosing, or automation gear

    Votes: 2 10.5%
  • Dry goods and restocks, like salt, media, or food

    Votes: 2 10.5%
  • Corals! Must...Have...CORALS!!!

    Votes: 5 26.3%
  • Fish or other livestock

    Votes: 0 0.0%
  • Rock, sand, or other aquascaping supplies

    Votes: 1 5.3%
  • I’m browsing, but don’t have a specific target

    Votes: 3 15.8%
  • I’m not shopping for reef deals this year

    Votes: 1 5.3%
  • Other (Post in the comments)

    Votes: 1 5.3%
Back
Top
Home
Post thread…
Market
What's new