Biocube 32 cooling suggestions

[wrasseputin]

Anyone have any suggestions on cooling for a biocube 32? Open to any ideas or products. I have an Inkbird controller w/stock hod and lights yet.

 

[MoeStachio]

I'm using a two head fan from Amazon paired with the InkBird ITC 308

https://a.co/d/eN06EXq
Works really well for my 15ga, and they come in 1-4 heads so perhaps the 3/4 would work for you.

Two settings so you have some options

 

[wrasseputin]

I'm using a two head fan from Amazon paired with the InkBird ITC 308

https://a.co/d/eN06EXq
Works really well for my 15ga, and they come in 1-4 heads so perhaps the 3/4 would work for you.

Two settings so you have some options

How do you mount them with the lid? Certainly an affordable option.

 

[MoeStachio]

I'm using a two head fan from Amazon paired with the InkBird ITC 308

https://a.co/d/eN06EXq
Works really well for my 15ga, and they come in 1-4 heads so perhaps the 3/4 would work for you.

Two settings so you have some options

How do you mount them with the lid? Certainly an affordable option.

Depends on the lid I suppose. Mine is open top AIO so I have it mounted to the back of the tank and pointed down to the center of the sump chamber between the filter sock compartment and the return chamber

Looks like a small light mount in the back.

It has two set screws to fasten to a lip

 

[ExpensiveSushi]

I wrote up my DIY install in this post. There's another post that has a nice 3d printed bracket for those fans. They worked great to keep the tank cool enough during summer, though I did have to replace them twice because of corrosion. I've since removed the lid.

E/S