- Joined
- Apr 4, 2019
- Messages
- 945
- Reaction score
- 653
I have changed out some of the LED's on my black box after some of the originals burnt out. The Led's that I used are all rated at 3.2-3.V 700 ma, violets are 3.5-4V 700 ma. The box I have has 2 channels with 26 LED's in series and 1 channel with 3 LED's in series. It works fine for a few weeks but I still occasionally burn out an LED. I haven't looked to see if it is a new or old LED that blows out. My question is what LED driver would I need to replace mine with to keep this up and going with these LED's. I currently have a PWM dimmer but would want a 0-10V to use with my apex. I believe the specs on the drivers installed are 100-240V input, 55-85V output, 570-590ma
If need be I can replace all the original LED's with the new ones to guarantee a uniform spec and put the violets on the channel with 3 led's to keep them separate from the ones with a higher voltage
If need be I can replace all the original LED's with the new ones to guarantee a uniform spec and put the violets on the channel with 3 led's to keep them separate from the ones with a higher voltage